614
701
1.0
8's
1411
100
PriTech, Coal Tar, Rock Shield, Black Mastic, Paint?
What are WG approved coatings.
100
Maintain a minimum of 3' from sources of ignition or 120-degree heat
What are inside meter clearances?
100
Vent terminations shall allow gas to vent freely away from _______, _______, __________ or _________?
Building openings, windows, doors or Air Intakes.
100
What is the pipes material designation code?
PE2406/2708
100
This pipe is exposed to more soil & contaminants, causing corrosion?
What is Bare Steel?
200
Disbanded coating, holidays, contact with underground utilities?
What is an AOC?
200
A minimum of 6' from edge of roof
What is rooftop clearance, without protection?
200
Guards may consist of __________, ________, ______, etc?
Posts, Bollards, Railings
200
What does NR on the pipe stand for?
No Rework - The pipe was not ground or pelletized & Reused.
200
What are different types of pipe found in the WG system?
Cast Iron
Bare Steel
Coated Steel
Polyethylene (PE or Plastic)
300
Use methods that does not damage pipe
What are procedures for removal of coating?
300
Controls the delivery pressure
What is a Regulator?
300
What is Not an SOS _____, _______, _______, ________, _________________?
Car port, Shed, Porches, Decks & Services & risers originally installed through foundation (older homes with indoor meters)
300
Why is weak link used?
Helps ensure the pipe is not stressed beyond limits
300
This is applied by spraying. What type of coating am I?
Liquid Epoxy Coating.
400
Corrosion, Pipe damage, damage coating & pipeline separation
What is exposed piping inspection?
400
Automatically shut off the flow of gas if regulator fails
What is an Security shutoff valve?
400
Rapid meter dial movement may indicate that the ___ is flowing rapidly or a major ____________ is downstream of the meter?
Gas, Major Leak
400
Gas pipe must be protected from heat _____ or greater
120 degrees
400
What should you do if you come across damage pipe during an installation?
(Hint) Three step process?
Stop the installation
Evaluate the damage
Contact the appropriate WG personnel
500
When done pipe should have a silvery, rough surface?
What is grit blasting?
500
Damages to facilities installed outside or inside of structures due to component failure, 3rd party damage, natural disasters or human error
What is a Hazardous Condition?
500
If there is No Immediate Hazard. What should you do?
Schedule it for repairs.
500
Damaged pipe is ______
Cut out, 3 pipe diameters
500
What damages are caused by machines or tools?
Coating defects
Weld defects
Mechanical damage