Fall Prevention
How much weight must an anchor be able to withstand per employee attached?
True/False: SOP for raw material receiving, inspection & storage are the responsibility of only the supply chain and board plant managers
False. It is the responsibility of the Supply Chain, Board Plant, JT and Quality Managers and all qualified personnel
What are 5 typical hand injuries?
Bruises/cuts/wounds/burns/broken bones/crushed bones/severed fingers
True/False: There are 17 sections in the Safety Rules & General Conduct booklet
False. There are 16 sections
How often are fire extinguishers checked?
Monthly
Plants - 4 ft ; Construction sites - 6 ft
Name 2 requirements for the COA
Manufacturing lot or batch number / actual test data and specifications / material type / date of manufacture / shipping date / PO or part number / quantity / test data for each batch
True/False: The company will supply employees with prescription industrial safety glasses with side shields once every 3 years
False. They will supply once every 2 years
What is the minimum distance that the different types of explosives and detonators are separated by?
25ft
True/False: No material can be stored within 20" of sprinkler heads
False. Limit is 18"
What are the common elements of a rescue plan?
Communication tools, equipment (ladders, mechanical lift, etc) and incident responders
True/False: Chang Chung and Tie & Tuck Tape are JT department products
True
Which body-related injury is the most frequent since January 2015?
Hand-related injuries
How often should you check the ground fault system on your equipment?
Daily
What is classified as a Class "A" fire?
Fires that occur in common combustible materials such as wood, paper, rags, etc
Who is responsible for assigning a Fall protection program admin and ensures that periodic inspections are performed?
Plant manager (Steve Forcier)
Name 3 board plant department products
Dextrose / Magnesium Oxide / Flyash / Potash / Retarder / Siloxane / AS 25 Soap / PCE
What class of High Vis Safety Apparel must be worn on the surface when near operating mobile equipment?
Class 2
What is the maximum pressure of compressed air that can be used to clean machinery?
30 psi
What type of extinguishers are primarily used for Class B and Class C fires?
Carbon dioxide extinguishers
How many levels of Fall Protection Training are there at CGC?
4
What do the Receivers write on the COA after they have checked it?
Date and initial top right hand corner of the COA
What are the 4 types of gloves?
Terrycloth/leather, Kevlar, neoprene/latex, rubber-insulated
What is the maximum length of board that 1 person is allowed to handle by himself/herself?
8 ft
What are the portable types of extinguishers at this plant?
Dry chemical, carbon dioxide and special (water/antifreeze - JT) extinguishers