Line of Fire
Never walk under this type of load
What is a suspended load
The use of this device is required when working within 4 foot of the unprotected edge of a dock, wharf, jetty, or pier.
What is a "personal flotation device (PFD)" or "life vest".
This temporary structure is placed around cranes to restrict personnel and traffic flow from accidental contact
What is a barricade
During entry, this person shall be located at the entrance to the confined space at all times.
What is an Attendant or Hole Watch is another acceptable answer
This Permit is issued for construction or maintenance activities anytime a utility or product pipeline is required to be cut
What is a line break or line cutting permit
this safety control must be worn at all times while operating a fork lift
What is a "seat belt"
The driver is responsible for ensuring that all passengers wear this.
What is a seat belt
Fire watch’s shall have this equipment readily available and be trained in its use.
What is a "fire extinguisher"
These boxes are used for lockout/tagout when more than one person is involved
What is a "lock box"
A hazard that cause injuries when body parts get caught in, on or between objects.
What is a "crushing hazard" or "Pinch-Point"
Fall protection equipment shall be immediately removed from service and destroyed after this type of event
What is "A Fall"
All lifting straps must be marked with this limitation
What is a Load capacity
This team is required to be at the opening during all entries into IDLH atmospheres and where breathing air is required.
What is a Rescue Team
This type of permit applies to all mechanical/manual excavation activities in which the top surface material removal will occur.
What is a Trench and Excavation Permit
This control system shall only be opened after a visual inspection to ensure no sheen, odor or any other signs of contamination.
What is a "Dike Wall Drain Valve"
or "Containment Valve"
The use of this device is prohibited while driving a company vehicle or personal vehicle for work purpose.
What is a mobile phone
This type of testing must be completed prior to all hot work activities
What is "atmospheric testing"
Contains a listing of all energy isolation devices and points for a lockout/tagout event
What is an "Energy Isolation Worksheet"
This type of hazardous energy includes rotating equipment, drive belts, conveyors, motors or compressed springs
What is mechanical energy
This device contains a drum-wound line which can be slowly extracted or retracted
What is a " Self-Retracting Lanyard"
a document that defines exactly how Lifting / Hoisting will be carried out.
What is a Lift Plan
These devices are to be used on all confined space jobs as a first line of communication
What are Radios
This type of permit is required for work involving voltage greater than 1000 volts AC or 1500 volts DC.
What is a High Voltage Electrical Work Permit
A Process to remove all or part of a fire protection system from service due to damage, testing or upgrades
What is a "Fire System Impairment"
This method of parking is required at all LBC facilities
What is "Back-in" or "reverse" parking
No hot work will be permitted where this limit is greater than 0
What is Lower Explosive Limit (LEL)
this type of lock is not allowed for energy isolation purpose.
What is a "combination lock"
This device should be installed on pressurized hose connections to prevent serious injury due to hose or coupling failure
What is a "Whip-check"
The use of this type of equipment allows a person to tie off, move, then use the second lanyard to secure the employee to the new working point and remove the initial lanyard connection.
What is a "double lanyard"
Only these workers may operate rigging, hoisting or lifting devices.
What is a competent person or trained and credentialed worker.
This monitoring device must be used for initial atmospheric monitoring
What is a A 5-Gas meter or (4-Gas + PID)
This type of risk assessment must be attached to the Permit to Work and include job specifics and detail the risks involved in the activities.
What is a Job Safety Analysis (JSA)
An energy isolating device that prevents the energizing of machines or equipment. Included are blind flanges, bolted slip blinds, chain, keyed locks, or any other approved lockout device.
What is a "lockout device"
This is the No. 1 cause of traffic crashes in Texas
What is "Unsafe Speed"
Hot work is prohibited within this distance of the hose connection at the dock during loading and unloading operations of flammable/combustible products.
What is "100 Feet"
Remember these three words for energy isolation
What is "LOCK - TAG - TRY"
This device must be used to secure all hand tools while working at heights
What is a "Lanyard" or "Tether"
This site-specific procedure is required whenever Authorized Persons are exposed to any fall hazard while using fall protection systems
What is a "Rescue Procedure"
This person's task is to act as the interface when the operator of the Lifting equipment has a restricted view due to any reason
What is A "Signal Person" or "Spotter"
This type of confined space is a space that contains or has a potential to contain a hazardous atmosphere.
What is a Permit Required Confined Space.
This person must remain in the work area for a minimum of 30 minutes after end of permitted hot work to ensure all hazards are eliminated.
What is a Fire Watch
Approval to remove someone else's individual lock from a lock box requires approval from these two people
Who is the "Terminal Manager and individual's acting supervisor"
This is the most frequent kind of crash in a work zone
What is a "rear-end crash"
These are the two types of hot work permits written at LBC
What is "spark-producing" and "non-spark producing"
The closure of a line, duct, or pipe by closing and locking and tagging two in-line valves and by opening and locking and tagging a drain or vent valve in the line between the two closed valves.
What is a "Double Block and Bleed"