CODE
These 2 rules provide exceptions to allow for fiber optic cables to be installed in a duct or plenum chamber
What are 2-130 and 12-010
This type of tester is used to help locate a communication wire's source
What is a tone generator
This is the name of the place where the communication service provider enters the building
What is the point of demarcation
This category of UTP cable has a transmitting limitation of 100 MHz
What is Cat 5
When installing a fiber optic cable through a fire seperation item, this must be done?
What is install a fire-stopping material
These are the 3 main phases of testing a LAN system
What are visual inspection, testing, documentation
This is the maximum length that a horizontal UTP cable should be
What is 90 meters
This is the category of UTP cable required for a system that requires 500 MHZ gigabit ethernet
What is Cat 6A
This is the minimum distance between the electrical power system ground electrode and the communication system grounding electrode
What is 2 meters
These are the three (3) types of crosstalk that are tested for
What are NEXT, FEXT, and ANEXT
This is another name for a UTP crimp-on connector
What is insulation-displacement connector
These are the three flamability standards that are applicable to communication cable install in BC
What are CSA Standard 22.2, BC Building Code, and Vancouver City Building Code
What is 600 mm
This type of tester is used to measure the wire map, length, attenuation, and crosstalk of a UTP LAN system
What is a certification tester
This is a critical step when terminating UTP conductors in a jack
Keep pairs twisted until point of termination
This rating of UTP cable can be used in a plenum but it has to be contained in a totally enclosed non-combustible raceway
What is FT-4
This is the minimum depth at which communication cable is to buried under a area subject to vehicular traffic (without mechanical protection)
What is 900 mm
This type of test is used to test the permanent portion of the communication cable from the patch panel to the work station jack
What is a "basic link" test
This is how gigabit ethernet uses all the conductors of a UTP cable
How is transmit and receive simultaneously and bidirectionally
This is main standard used in the communication industry in Canada
What is CSA T568.2 - 05 (2010)