R&R
Taping two ends of material together.
What is a seam?
Mechanical Foam
What is an example of Table 1 paste?
This picks up lacquer from the pan.
What is the raster?
Before entering the production area, these are the minimum required items you should be wearing.
What is PPE?
Pop pop popping in the Top Emboss Station.
What are Bubbles? (P4)
The interlayer roll is cut, measured, and marked properly.
What is prepping a roll?
This offers heat protection and tear resistance.
What is wearlayer? (T3)
Application target is 12.
What is glass fiber?
This is what makes up OEE.
What is Availability X Performance X Quality?
What are traverse lines?
This keeps from the material unthreading during a seam.
What are clamp bars?
Short stroke, pull in a 'V' shape to taper the tear back to a full width.
What is a tear in the center of GF? (Tables 2-4)
The current gloss reading is 10 from the gloss meter.
What is high gloss?
This position encapsulates plastic on the ends of the roll and affixes a ticket on each roll as well.
What is Packaging?
A crease leaving the unwind station.
What is a supplier defect?
The material is jogging backwards when I'm pressing the forward button.
What is incorrect direction?
This expands in the big oven.
What is blowing agent?
Spotty lacquer across the whole web is fixed.
What is closing the gap and/or increasing raster speed fixing?
This man is the founder of a company that was renamed to Beaulieu in 1964, then B.I.G in 2005.
Who is Roger De Clerck?
The product looks hazy at the quality table.
What is Out of Register? (D1)
This helps maintain proper tension + speed control
What is diameter input?
Material is building up on the material edge of the push roller in GH1.
What is overran edge?
The sponge roll was not receiving enough lacquer until this.
What is opening the raster roll gap? (or increasing speed)
The next Beauflor Christmas Party is on this day.
What is December 12, 2026?
Crackles are leaving Gel House 2.
What is not enough pressure / too open gap?