A person who locks and tags machines or equipment in order to perform service or maintenance.
Who is an Authorized Employee?
100
this LOTO device allows multiple Authorized employees to lock out a piece of equipment.
What is a hasp?
100
A prominent warning tag that can be securely fastened to an energy-isolating device to indicate that the energy-isolating device and the equipment being controlled may not be operated until the __________ has been removed.
What is Tagout device?
100
An example of _________ energy is the energy released by a spinning shaft as it turns.
What is Mechanical?
200
The force caused by a pressured fluid, especially water.
What is hydraulic?
200
An employee whose job requires him or her to operate or use a machine or equipment on which service or maintenance is being performed under LOTO or whose job requires him or her to work in an area in which such service or maintenance is being performed.
Who is the Affected Employee
200
2 major components used to make up a LOTO program
What is a lock and tag?
200
All sources of power to a given piece of machinery or equipment. These can be electrical, pneumatic, hydraulic, mechanical, potential, thermal or gravity.
What is Energy
200
A lock (either combination or key type) that holds an energy-isolating device in a safe position and prevents the machine or equipment from energizing.
What is Lockout Device?
300
The force caused by compressed air.
What is pneumatic?
300
In the event that the hazard remains under direct and immediate control of the _______ employee, LOTO procedures are NOT required.
What is Authorized?
300
this is used to lock out a gate valve
What is chain/cable or gate valve cover?
300
to release stored hydraulic, electrical or pneumatic energy
What is bleed?
300
This must be durable, effective, standardized, identifiable, and the same color.
What is Lockout/tagout devices?
400
The force stored in an object that isn't moving.
What is Potential (stored)?
400
This employee must be informed when LOTO is being performed.
Who is the Affected Employee?
400
this is used to communicate the name, date, and reason for locking out the equipment
What is a Tag?
400
All energy has been controlled in the machinery or equipment.
What is Zero-Energy State?
400
You can use these items to isolate energy.
What is blank, skillet, chain, locking valve, lockable electrical disconnect?
500
The force caused by moving parts.
What is Mechanical (or kinetic)?
500
When utilizing a "partial lockout" for the collection of data, or troubleshooting of equipment, the area must be barricaded, constantly attended, and completely controlled by the _________ employee.
Who is the Authorized?
500
these 2 devices are used to lock out a vertical hydraulic press
What is a block lock and tag?
500
To physically prevent the movement of machinery or equipment using mechanical devices such as blocks, chains, cribbing or timbers.
What is Block-out?
500
When and why the equipment was locked out and who placed the lock on the equipment are all items need for what?