Components
Name the two accumulators
1. Pressure Roller
2. Friction Brake
What type of fuel goes in the M-31's?
Diesel
What is the first step when turning the gear on?
(make sure clutch is disengaged)
Plug in the battery
When are pre-ops conducted on the gear?
Before operations or 4 days with no ops.
What is the purpose of hand and Arm signals?
Non-Verbal Communication
What are the dimensions of the purchase tape?
-Long -Wide- Thickness
Wide= 10 in
Thickness= .300in
The Hydraulic Control Panel is apart of witch Installation?
Electrical Installation
What is the hand and arm signal for 300 PSI?
Motivate me
Which direction does the turn buckle face when connected to the gear?
U.S. faces the gear
How many outriggers on Routine? Concrete?
Routine is 7
Concrete is 5
What are the two parts of the arresting gear assembly?
1. Energy Absorber Assy
2. Brake Clutch and Bearing Assy
What are the three parts of the power unit assembly?
1. Diesel Engine
2. Fluid Coupling
3. PTO Clutch
What do you look at before giving the 500 or 300 PSI hand and arm signal?
Brake Clutch Gauge
How long do you warm up the gear for?
Two Minutes
What needs to be on before lowering the trailer?
The Hydraulic system
What are the 8 Components of the Hydraulic Installation?
1. Reservoir
2. Thermo Switch
3. Oil Cooler
4. Hydraulic Filter and Gauge
5. Accumulators
6. Cooling system motor
7. Main Control Manifold
8. Hoses and Fittings
What are the 8 parts of the basic trailer sub assembly?
1. Running Gear Assembly
2. Hydraulic and Parking Break Assembly
3. Mobility Cylinder
4. Front Sheave Assy
5. Rear Sheave Assy
6. Absorber Sheave Assy
7. Trailer Platform
8. Pintal Assy
What is the proper hand and arm signal for cinch?
BOOM
What is the MIP?
Maintenance Index Page
What tool do you use to position the trailers?
Rings and Strings
Name the 10 components of the Cooling installation?
1. Radiator
2. Water Pump
3. Expansion Tank
4. Radiator pressure cap
5. Check Valve
6. Automatic 3 Way Valve
7. Drain Valve
8. Y-Strainer
9. Cooooooolant
10. Temp Sensor and Thermometer
Name the 10 parts to the basic trailer assembly?
1. Pressure Roller Installation
2. Pendent Reel Assy
3. Worm Gear Assy
4. Multi Banded V-Belt
5. Roller Chain
6. Quadrant Control Assy
7. Engine Feed And Return Hoses
8. Brake Manifold Assy
9. Stabilizer Ring Assy
10. Energy Absorber Roller Assy
What two switches need to be engaged to turn the gear on after the Main power switch is on?
1. Ignition Switch
2. Oil Pressure Bypass
What is the cooooolant mixture of water and Ethylene Glycol?
40% Water 60% Glycol
What is the turnbuckle (1 by 12) opened to?
The one that attaches to the template.
61 inches