G-codes
M-code
Tooling setup
Misc
What do I know?
100
a g-code used to call work zero
What is G54
100
this m-code is used to call a tool change
What is M6
100
when using a vise this must be done
What is alignment
100
these are used to elevate a part
What are parallels
100
surface footage and tool diameter and a 3.82 constant are used to calculate this
What is RPM
200
The g-code used for rapid traverse
What is G0
200
A code that is used to start the spindle CW
What is M3
200
setting this location is part of setup
What is Part zero
200
this must be done after tightening a part in a vise
What is Seat the part
200
this feature must be rotated 29 degrees to the right when preforming this function
What is RH thread cutting
300
The g-code used for a tool change
What is none
300
The code that is used to stop the spindle
What is M5
300
a feature that is an raised circular shape
What is a boss
300
this is performed on a manual mill to square the head to the table
What is tramming
300
this tool is used to align the thread tool on a manual lathe
What is center gage
400
the code used for the X & Y plane
What is G17
400
The code that is used to turn on coolant
What is M8
400
a devise that spins and is used to locate a hole/boss
What is coaxial indicator
400
on the lathe, the headstock and tailstock must be inspected for this
What is alignment
400
thread inspection tool
What is Go gage or thread master
500
Absolute positioning code
What is G90
500
The rewind the program code
What is M30
500
this tool is used to pick up an edge
What is edge finder
500
when turning on a lathe, the cutting tool should be checked for this
What is center height
500
this device is used to accurately locate a part at a angle
What is Sine bar
M
e
n
u