CAM/CNC Mill
When we use a Facing tool path, we want to use the _______________ tool available.
Largest
What is a Parallel Circuit
where 2 lights have the same power but are not connected
All hand tools should be inspected for?
Proper function
The intersection of the 3 default reference planes is called what?
Origin
You need one of these to sketch on.
plane
What tool path makes the tool cut material from the inside of a part, leaving material on the outside?
Every part of a series circuit carries the same amount of:
current
Name a products that is electrical but not electronic
Drill
What is the surface that we 3d print on called?
build plate
What should you do to be able to identify one feature from another feature. For example if you had 100 extruded features.
Label each feature with a description of the piece
What type of code does the CAM software produce?
Numeric
What polarity can DC electricity be?
negative or postive
what is a A fire extinguisher use on?
wood
This forms the basis of all extruded parts.
Sketch
What is the name of the feature that rounds corners?
Fillet
On the CNC mill we use in our shop, all of the tool offsets are set from which tool?
Tool 1
In a series circuit, current:
is the same everywhere, in all components
Right cutting Tin Snips are what color?
Green
Two circles or arcs that share the same center are called?
Concentric
What feature hollows out an object with a specific wall thickness?
Shell
When using the 3/8" diamter flat end mill, once you find the edge of the part to "zero" it out, what is the proper offset to put in for X and Y?
-.1875
Solder is...
a metal that is melted to make solid electrical connections.
Which of the following are good safety practices when working with electricity?
Let only trained technicians do repairs on electrical equipment.
and
Check for loose connections and worn insulation with the power off.
If you have multiple parts and want to show how the parts fit together you must create a/an _____________.
Assembly of many parts
How do you add a non existing plane to draw on.
Insert reference geometry, plane