Under company policy, how often shall rubber gloves and sleeves be exchanged?
What is every 90 days
100
Under company policy, how often shall rubber good be exchanged?
what is every 6 months
100
The diameter and max amperage of #4 ACSR (Swanate)
what is .257 diameter and 152 amps
100
A device used to transfer alternating current from one circuit to another without a change in frequency but with different values of voltage and current.
transformer
200
The voltage and length of time class 2 rubber gloves are tested at?
what is 20,000 volts for 3 minutes
200
What is the max voltage our high voltage rubber blankets may be used?
what is 36000 volts
200
What does a 20T line fuse convert to on a K curve?
what is a 30 K
200
The direction of current flow through a wire determines ____________ of a magnetic field?
Polarity
300
The max voltage rubber cover can be applied off a wooden structure.
What is 12,500 volts phase to phase
300
The voltage our high voltage rubber blankets tested at and how long?
what is 40,000 volts for 3 minutes
300
The substation is at 1950 East and 3550 North in Twin Falls county
What is Clover Substation
300
The polarity of 200 KVA and below or 8660 volts and below
what is additive
400
The required rubber PPE when setting a pole in a de-energized and grounded line
what is rubber gloves or boots
400
All rubber goods must be rated for the _________ voltage to be worked.
what is Phase to Phase
400
The ground trip block function shall be used on a re-closure, when?
What is anytime the bypass switches are operated above the re-closure.
400
The total degrees of conduit bend a reduced charge customer may use. (Not including bend at the meter or IPCO facilities)
What is 135 degrees
500
The color of the insulating rubber glove label on class 3 rubber gloves
what is green
500
An insulated mechanical jumper laying on a wood crossarm requires how many layers of protection
what is one additional layer of protection
500
The amount of hydro electric plants IPCO owns and operates