Belt Disc Sander
The side you sand on is the ____ side.
Left.
A stock less than 12 inches wide is...
Not good for planing.
What should you always use to keep wood in place?
A clamp.
So far we made _________ with Inventor
Keychains.
When drilling a hole, have some _____ underneath the material.
Stock.
If you sand on the right side, the object will then...
Multiple people need to be when using the planer. One person needs to insert the stock, and what does the other person do?
Take the stock from the planer.
When using the miter saw, Don't go slowly, you can tell if you're going too slowly if...
You notice a burning scent.
What is the file type for 3D printing.
STL.
A chuck key is used for...
Tightening and loosening the drill bits.
What should you always turn on besides the sander itself?
Dust collector.
Always plane with the _____ of the wood.
Grain.
Where should you not aim when using the compressor nozzle?
Your face.
When making a sketch, make sure to list the...
Dimensions.
When you are drilling a deep hole, what do you do to cool the bit.
Frequently raise the bit.
The disc is about __ inches long.
12 inches.
How thick should your stock be before planning.
1/4 thick.
If you need to cut small material, what should you not use.
Miter saw.
After making a sketch, you...
Extrude it.
Never replace drill bits while the machine is...
In motion.
What should not be sanded?
Plastic and metal.
Painted wood should...
Never be planed.
Before using the sander, turn on the...
Dust collector.
Where do you put all Inventor projects?
Google Drive folder.
What do you do first when changing depth?
Loosen the stop collar.