Clamps
This is what you do before you move your forklift or EPJ
What is "Look 180 degrees"
This MIT principle pertains to Stability of load
What is "Forks Low"
This is what you do before you move a sled with freight on it.
What is Inspect the stability of the load.
Indicates the correct position/ orientation for the carton.
What is Proper Orientation or "This side up"
This is what you must do at blind corners.
What is "Stop, Honk and Look"
This MIT principle pertains includes looking in the direction of travel
What is "Good Looks"
This is how to properly shrink wrap stacks of washers that are leaning
What is shrink wrap a pair of washers ( side by side) at a time and never 4 together.
Indicates the product inside the packaging is fragile and needs to be handled with care.
What is "Fragile"
This is what you do when you are driving in the main aisle and passing blind corners
What is announce your presence by using your horn intermittently.
This MIT principle pertains operating slow enough for condition
What is "Safe Speed"
This is the maximum number of boxes of furniture you can move with your forklift.
What is four
Indicates the number of cartons that can be vertically stacked for storage.
What is Maximum Stack Stacking by Number
This is the load center of a standard size pallet
What is 24
Indicates that carton is heavy, must use two or more people to lift. Failure to do so may result in injury.
What is Heavy Weight/ Multiple Person Lift
This is the measurement from the center of gravity of a load to the end of the freight that touches the vertical face of the fork.
What is a "Load Center"
This is what MIT stands for
What is the "Most Important Thing"
Indicates the carton can not be clamped multiple units at a time from this side.
What is Multiple Unit Clamping NOT permited.