Fall Protection
HazCom
LO/TO
Powered Industrial Trucks (Forklifts)
Fire Safety
100
Every open-sided floor or platform ____ feet or more above adjacent floor or ground level needs to be guarded by a standard railing on all open sides.
4
100
This pictogram indicates a __________ hazard associated with the substance.
health
100
LO/TO is a technique used to prevent ______ from being released during the servicing of equipment.
energy
100
Only ________ drivers can operate a Powered Industrial Truck.
certified
100
The four parts of the fire tetrahedron are heat, ________, fuel, and chain reaction.
oxygen
200
Protection for floor openings must have a top rail, mid rail, and _____________.
toe board
200
In addition to a written program and SDSs, employers are required to maintain a ___________.
list of chemicals
200
When is LO/TO required?
When servicing equipment.
200
Re-training is required every ____ years or if a forklift incident occurs.
3
200
The letters in the PASS method stand for Pull, Aim, ________, and Sweep.
Squeeze
300
Ladders should extend ____ feet above the point of support.
3
300
This pictogram indicates that there are ___________hazards associated with this substance.
environmental
300
Step One of a LO/TO process is to ________________.
identify all energy sources
300
Always make eye contact with ____________ when they are in the vicinity.
pedestrians
300
This type of fire extinguisher is intended for fires fueled by common combustible materials (wood, paper, cloth, plastics, etc.).
Class A
400
A personal fall arrest system must be rigged so that an employee can neither free fall more than ____ feet nor contact any lower level.
6
400
DAILY DOUBLE!!!!!
What section of a SDS provides information on first aid measures?
400
How many steps are there in a LO/TO process?
9
400
It is estimated that 20 - 25% of forklift accidents are, at least in part, caused by ________________.
inadequate training
400
This type of fire extinguisher is intended for fires fueled by flammable and combustible liquids (oils, greases, tars, oil-based paints, etc.).
Class B
500
All employees exposed to fall hazards must receive training by a ______________.
competent person
500
This pictogram indicates that this substance is an ___________ .
ce.
oxidizer
500
Bureau of Labor Statistics (BLS) study on injuries while servicing equipment revealed that _____% failed to turn off equipment.
80
500
In order to avoid rollovers, the ____________ must stay inside the stability triangle.
center of gravity
500
DAILY DOUBLE!!!!!
What type of fire extinguisher is for commercial cooking appliances and combustible grease and oil?