Packaging, Marking, Handling, Transferring, Disposition, & Storage of Classified Hardware
True or false: Classified and unclassified hardware can be stored in the same ESD bag.
FALSE, per MPM-11-013-CHM
5 of the 7 cleanrooms listed in MPM-11-015:
What is:
The database associated with the cleanroom logs that has a name similar to what pizza chain:
What is: A. Dominos (per MPM-11-015-CHM)
If you drop a torque wrench or suspect any other damage, what should you do?
What is: C. Turn it in to calibration (per MPM-11-002-CHM)
During cold weather, parts should be:
What is: C: At room temperature (per MPM-11-016-CHM)
True or false: Classified hardware must be placed into an ESD bag or safe box when not being worked on / moved between work stations.
True, per MPM-11-013-CHM
4 of the 6 controlled rooms listed in MPM-11-015
What is:
The amount of time that temperature, humidity, and particle counts should be kept?
What is: B. 1 year (per MPM-11-015-CHM)
The difference in movements between torque and tension
What is: twist and pull (per MPM-11-002-CHM)
True or false: When storing an airbrush, ensure that cleaning solution it in the fluid cap to prevent build up.
FALSE: Never store your airbrush with spray medium or cleaning solution in the fluid cap (per MPM-11-016-CHM)
True or false: If no drybox is available, hardware can be stored within a GSA approved safe.
True, per MPM-11-013-CHM
The Measurements that is not taken for the clean room:
What is: C. People Count (per MPM-11-015-CHM)
The next steps after someone detects a clean room condition is beyond the specification limits:
What is: G. All of the above (per MPM-11-015-CHM)
The formula for torque
What is: Distance x Force (per MPM-11-002-CHM)
True or false: Conformal coating with pinholes, whitish spots, blistering, wrinkling, cracking, peeling, and other deformities is acceptable.
FALSE: the item shall not be accepted (per MPM-11-016-CHM)
When putting a classified label on an ESD bag or box, what level of classification do you use?
A. Whatever classification you want
B. ESD bags and boxes do not need classifications
C. The highest level of classification held within the bag
C. The highest level of classification held within the bag (per MPM-11-015-CHM)
The person who maintains the temperature database:
What is: B. Manufacturing Engineers (per MPM-11-015-CHM)
The type of air pressure cleanrooms must be kept at:
What is: A. Positive (per MPM-11-015-CHM)
True or false: Torque wrenches should be used to loosen fasteners that have been "locked" (either sealed with epoxy or contain other threading locking devises).
False: Torque wrenches should NOT be used to loosen "locked" fasteners as it may cause permanent damage to the tool. (per MPM-11-002-CHM)
The log sheet used to track paint usage
What is: A. Form U-E082 (per MPM-11-015-CHM)
What movement does the stockroom personnel do to electronically transfer classified hardware?
A. The electric slide
B. A 311
C. The Worm
D. A 360
E. A 281
B. A 311 (per MPM-11-013-CHM)
The way particle count is measured:
What is: B. Average of the day (per MPM-11-015-CHM)
True or False: When conditions in a clean room are observed to be outside of specification limits, assemblers should continue working until its fixed.
FALSE: Work must be stopped until appropriate actions are taken to fix the conditions of the clean room. (per MPM-11-015-CHM)
True or false: If lock and flat washers are used, you must always place the lock washer closest to the fastener threads
FALSE: You must place the lock washer closest to the fastener HEAD (per MPM-11-002-CHM)
The type of gloves required if parts are sprayed while being held with the other hand and during the mixing and pouring of chemical coatings & solvents/thinners
What is: Nitrile Rubber Gloves (per MPM-11-016-CHM)