Introduction to Power Tools 1
What is important to do when using a grinder on a plat form?
Press the metal to the disc prior to starting the grinder.
Which grinder accessory can be used to provide a stable surface for flexible sanding discs of buffing pads to rest against?
Backing pad
What are two of the most important pieces of PPE when using a grinder?
Ear protection, safety glasses
What is an angle grinder used to grind?
Hard heavy materials.
What type of rotary bits can cause a grinder to catch on rough materials edge or shift around?
Abrasive
Why should a circular saw that does not have an upper blade guard never be used?
The exposed blade poses a danger
How do electric and pneumatic nailer differ from power actuated nailer?
Require more training
What range of pressure should pneumatic nailers be operated?
70 to 120 psi
What is never to be engaged when using power tools?
Trigger lock
What does a heavy duty cordless drill have that is different from typical cordless drills?
Voltage rating
What material is drilled with a hammer drill?
Auger
A power miter saw combines a miter box with a?
Circular saw
Which low-velocity fastening system that is used to drive steel pins or threaded studs into masonry and steel is a?
Powder -actuated tool
A Porta-Power is an example?
Hydraulic tool
When is a penumatic drill is commonly used?
When there is no source of electricity
When using power tools, never engage the
Trigger lock
Before replacing parts such as bits, blades, or discs on any tool, you must?
Disconnect the power source
Most hammer drills will not hammer until pressure is?
Applied to the drill bit
Never use a circular saw that does not have an
powder-actuated tool
Special training and certification is required before using any kid of _____.
powder-actuated fastening tool
A power tool that is well suited for breaking up concrete during demolition work is a?
Pavement breaker
Before using a pneumatically powered nailer for the first time, it is important to _____.
read the manufacturer's instructions
If a pneumatic nailer is not firing properly, before attempting repairs be sure to?
Disconnect the air hose
Special training and certification is required before using any kind of ?
Powder-actuated fastening tool
Before you plug any saw into a power source, make sure the?
Power switch is in the OFF position