Introduction to Power Tools 1
What are some chalk lines also designed to serve as?
Plumb bob
Maesuring which type of surface can make a measurement with a laser inaccurate?
Highly Reflective
Where are the three special marks on a folding rule?
16", 19.2", 24"
What does it mean when an object is plumb?
Perfectly vertical
Which pliers are used to get into narrow places where other pliers cannot reach?
Long nose
What is another name for a machinist's
hammer?
Ball peen hammer
Refer to the figure provided, what wrench is shown?
Box-end
What should happen with tool parts that are worn, broken, or lost?
Replace Immediately
How does a traditional spade differ from round and square shovels?
Flatter and without curved sides
The safest utility knife has what type blade?
Self-retracting
What is a characteristic of a pipe clamp?
Rounded, toothed jaws for gripping pipe
A power miter saw combines a miter box with a _____
Circular saw
When using power tools, never engage the
Trigger lock
An angle grinder is used to grind _____.
hard, heavy materials
The adjustable tool rest on a bench grinder should be positioned _____.
1 8 inch from the grinding wheeel
A good way to check the condition of the grinding wheel on a bench grinder is to _____.
perform a ring test on the wheel
A grinder can catch on rough material edges and shift around, especially when using rotary bits called _____.
burr bits
When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's?
Kerf
A low- velocity fastening system that is used to drive steel pins or threaded studs into masonry and steel is a(n) _____.
powder-actuated tool
Special training and certification is required before using any kid of _____.
powder-actuated fastening tool
A porta-Power is an example of a(n) _____.
hydraulic tool
Before using a pneumatically powered nailer for the first time, it is important to _____.
read the manufacturer's instructions
Saws with fine blades that are excellent for delicate and intricate cutting are called?
Saber saws
If a pneumatic nailer is not firing properly, before attempting repairs be sure to _____.
disconnect the air hose
A power tool that is well suited for breaking up concrete during demolition work is a(n) _____.
Pavement breaker