Ground Control
Ground Conditions should be inspected at this frequency.
What is at least once per shift
New miners are required to have this number of hours of training within their first 90 days of working at the mine.
What is 24 hours
This ensures that all energy sources are isolated before electrical or mechanical work is performed.
What is Lock Out Tag Out.
MSHA requires eye protection to be worn in this instance
What is where a hazard exists that could cause injury to unprotected eyes (30 CFR 56.15004)
The device used for monitoring tire pressure on pickups.
What is a Tire Pressure Monitoring System (TPMS)
This minimum distance should be maintained from the top edge of the highwall when fall protection is not worn.
What is at least 6 feet
MSHA is required to inspect each surface mine operation this many times each year
What is twice a year
Annually AND when a plant is moved or a generator is swapped out or plant configuration is modified, this electrical test must be performed and documented
What is a Ground Continuity and Resistance Test
You will find CB channels, haul routes and other site specific information in THIS MSHA training
What is Site Specific Hazard Awareness Training
GOAL stands for
What is Get Out And Look
These temperature conditions can create highwall collapse hazards
What are freeze/thaw conditions (heavy rain conditions can also create hazards, but they are not temperature conditions)
True or False: Mine owners working in the mine do not require MSHA Part 46 training
False. Mine owners are, by definition, miners under the Mine Act and must have completed New/Experienced miner training, Annual Refresher AND Site Specific Hazard Awareness and New Task training.
MSHA requires all electrical extension cords to have a ground continuity and resistance test performed and documented unless THIS feature is incorporated
What is a GFCI system.
ARI needs to hire a 3rd party mechanic to work onsite for 4 consecutive days. What MSHA training does the mechanic need?
Site Specific Hazard Awareness training.
New Miner Training is NOT required for 3rd party vendor mechanics unless they are on site for 5 consecutive work days. 30 CFR 46.2(g)(1)
Wearing your seat belt in a light truck limits your risk of critical injury by _____ percent
What is 60%
This minimum berm height must be maintained for all haul roads where a drop off exists to cause a vehicle to overturn
What is Mid-Axle height of the largest piece of equipment usually travelling the roadway (30 CFR 56.9300(b)
Miners must receive ____ hours of MSHA REFRESHER training every _______ .
What is:
- 8 hours
- every year.
A shock involving as little as ________ volts can be fatal
What is 40 volts
These three devices are required when inflating tires
What is a
1. Clip on chuck
2. In-line regulator
3. Restraining device or barrier
If you doze off for 4-5 seconds while driving at 55mph, your car will travel for how many yards while you are sleeping.
What is 50 yards
ARI requires all employees to maintain this distance when working near the base of a highwall
What is 1/3 of the height of the face of the highwall
These are the four types of MSHA training that will be documented separately
1. New and/or Experienced Miner Training
2. Annual Refresher Training
3. Site Specific Hazard Awareness Training
4. New Task Training
When a person is working in mobile equipment that has made contact with a live power line and is engulfed in flames, this is the safest way to exit the equipment
What is with both feet contacting the ground simultaneously (the "bunny hop")
The 4 rules of radio communication are
What is Clarity, Simplicity, Brevity, Security.
These are the 6 essential fluids you should be checking on your ARI truck on a regular basis.
What is:
1. Engine oil
2. Coolant
3. Power steering fluid
4. Brake fluid
5. Transmission fluid
6. Windshield washer fluid