Inspection Station Licensing
This document outlines the procedures and standards for vehicle inspections in New Brunswick.
What is the Official Vehicle Inspection Station Manual?
This component must be inspected to ensure it is free from cracks and provides a clear view.
What is the windshield?
This tool is essential for lifting vehicles during inspection.
What is a hoist or pit?
This sticker is affixed to a vehicle that passes inspection.
What is an approval sticker?
The consequence for an inspection station failing to maintain the standards outlined in the manual.
What is the loss of the privilege of conducting official motor vehicle inspections?
The department responsible for issuing licenses to Official Vehicle Inspection Stations in New Brunswick.
What is the Department of Justice and Public Safety?
The system responsible for slowing and stopping the vehicle, which must be thoroughly inspected.
What is the braking system?
A device used to measure tire pressure during vehicle inspections.
What is a tire pressure gauge?
The location where the approval sticker should be placed on a vehicle.
What is the inside lower left corner of the windshield?
The action required if an inspection station ceases operations permanently.
What is returning all inspection supplies, including stickers and report books, to the Motor Vehicle Branch?
The minimum number of certified mechanics required on staff at an Official Vehicle Inspection Station.
What is one?
The minimum tread depth required for tires to pass inspection.
What is 1.6 millimeters (2/32 inches)?
This tool measures the thickness of brake drums and rotors.
What is a brake drum and brake rotor gauge (Vernier caliper)?
The document completed by the mechanic detailing the inspection results.
What is the Vehicle Inspection Report?
The responsibility of ensuring inspection supplies are not lent or borrowed between stations.
What is the duty of the Inspection Station Licensee?
The specific trade certification required for a mechanic to perform vehicle inspections.
What is a Certificate of Qualification in Motor Vehicle Mechanic (Automobile), Motor Vehicle Mechanic (Steering, Suspension and Brakes), or Motor Vehicle Mechanic (Truck and Transport)?
The device used to ensure headlights are properly aligned during inspection.
What is a headlamp aiming device?
The equipment required to test the alignment of headlights.
What is a headlamp aiming device?
The duration a rejection sticker extends the inspection compliance date.
What is fourteen days?
The penalty for making a false statement on a Vehicle Inspection Report.
What is being found guilty of an offence and subject to penalties prescribed by the Motor Vehicle Act?
The annual fee for renewing an Official Vehicle Inspection Station license.
What is thirty-eight dollars?
The maximum allowable play in wheel bearings before a vehicle is rejected.
What is 3 millimeters (1/8 inch)?
The minimum length of enclosed space required if a headlamp testing machine is used.
What is 7.5 meters (25 feet)?
The entity to be notified immediately in case of loss or theft of inspection stickers.
What is the Motor Vehicle Branch?
The act governing vehicle inspections in New Brunswick.
What is the Motor Vehicle Act?