Fall Protection
First Aid & Safety
Electrical
PPE
100

The highest safe standing level on an extension ladder is the _____.

Fourth rung from the top

100

What characterizes safety? 

A learned behavior and attitude

100
This is the only person who can remove a tag/lock in a lockout / tagout situation.
What is the person who applied the lockout/tagout?
100

In general, eye protection is required _____.

Whenever you are on a job site

200
These protective measures must be taken to prevent objects from falling and striking a person when working on scaffolding.
What is toeboards, debris nets, or canopies?
200

Poor lighting, excessive noise, and inadequate guards for moving parts are examples of _____.

Unsafe Conditions.

200
This is one of the most common grounding systems used for protection against accidental electrical shock
What is a three wire system?
200
This type of respirator should be used when dust or solid particles could be inhaled.
What is a half mask with a mechanical filter?
300
When stacking materials, such as bricks or block, do not stack materials beyond this ratio.
What is a 4:1 height to base ratio?
300
Poor lighting, excessive noise, and inadequate guards are examples of this.
What are unsafe conditions?
300
This system protects workers from the release of hazardous energy while they work with machines and equipment.
What is lockout/tagout?
300

Hearing protection must be used when it is necessary to shout at this distance.

What is less than 2 feet?

400
A measure of the probability, consequences, and exposure related to an event is referred to as this.
What is risk?
400
In the absence of other information, all soil in an excavation should be treated as if it was this type of soil.
What is Type C?
400
This must be in place when workers are working near a electrical welding operation (or any operation for that matter).
What are welding shields?
400

This is the proper location for the D ring on a fall protection harness.

Between the Shoulder Blades?

500
When placing a ladder against a platform or roof, the top of the ladder should extend above the point where it touches the platform or roof by at least this much?
What is 3 feet?
500
This can be a source of lead on the jobsite.
What is paint?
500

When there is a hole or gap on a construction site, what do you need to do? 

Guard or cover the hole 

500

What are guards for on tools? 

To protect the worker from rotating blades or moving parts

M
e
n
u