Cutting Edge Technology
This hand saw features a fine-toothed blade tensioned in a frame, typically used for cutting metal pipes or plastics.
What is a hacksaw?
When pulling an adjustable wrench, you should always place the primary turning pressure on this stationary side to avoid breaking the tool.
What is the fixed jaw?
Thanks to its weighted casing, suspended chalk reels can be hung vertically to double as this ancient tool used to find a perfectly straight line down.
What is a plumb bob?
Aside from breaking through walls, this heavy, two-handed striking tool is most commonly used for this outdoor installation task.
What is driving a post or stake?
Featuring a curved, pointed blade, this most ubiquitous type of shovel is engineered specifically for this standard excavation task.
What is dig dirt?
Featuring a thin, flexible blade held in a C-shaped steel frame, this tool is ideal for cutting intricate shapes and curves in wood.
What is a Coping Saw?
This type of fastener features a distinct 6-point star-shaped pattern designed to prevent the driver from slipping out.
What is a torx screw?
While they look like identical metal L-shapes, these two layout squares differ because one has trade-specific math charts stamped directly onto the steel.
What are a carpenter's square and a pipefitter's square? (or formulas printed on the side)
Featuring one flat face and one rounded face, this tool is frequently called by this trade-based name due to its heavy use in metalworking and repair.
What is a machinist hammer?
While traditional hand tools used hickory or ash, modern heavy-duty shovels swap out wood for this strong, lightweight synthetic composite material.
What is fiberglass?
Named for the stiffening rib along its top edge, this saw is commonly paired with a miter box to make precise angled cuts.
What is a back saw?
This fastener head features a square-shaped socket that allows for easy, one-handed driving without slipping.
What is a Robertson screw?
Standard tape measures highlight these three repeating numbers in red or diamond symbols to mark common stud spacing for wall and floor framing.
What are 16, 19.2, and 24 inches?
This specialized tool features a flat, textured face on one side for striking nails, and a sharp hatchet blade on the other for scoring wallboard.
What is a drywall hammer?
Featuring a flat blade and raised edges, this shovel type is engineered specifically to scoop up loose materials like gravel, coal, or sand from flat surfaces.
What is a square shovel?
This hand saw features large, chisel-like teeth designed specifically for cutting parallel to the wood grain.
What is a rip saw?
While often misused to pry open paint cans, this tool's actual engineered purpose is solely to perform these two actions on fasteners.
What is tighten and loosen screws?
The blade of a steel tape measure is manufactured with this curved shape to prevent it from buckling when extended long distances.
What is to make it stiff? (or easier to read)
This pointed metal tool is struck with a hammer to create a small dimple, ensuring a drill bit doesn't wander across the surface.
What is a center punch used for?
Using a pick becomes a severe safety hazard if this specific mechanical connection fails, causing a heavy metal mass to fly off during a swing.
What is when the head is not firmly attached
To ensure your finished piece is accurate, you should always guide your saw blade along this specific side of the cut line.
What is the waste or scrap side?
Resembling a heavy-duty monkey wrench but modified for plumbing, this tool features smooth, toothless jaws to prevent marring chrome or brass fittings.
What is a spud wrench?
Airborne particulate like dust or smoke, along with highly reflective surfaces, can distort layout beams and cause this tool to miscalculate.
What is a laser level/measuring tool?
This descriptive term refers to the dangerous flaring and flattening that occurs on the struck end of a punch or chisel, which can throw off sharp metal splinters if hit again.
What is mushrooming?
Featuring a narrow, elongated, and straight-edged blade, this specialty tool is designed to dig clean, deep vertical sidewalls for underground utilities.
What is a spade shovel?