ProPrac
Code: green
Code: red
Wood if I could
Finish strong
100
NCIDQ is the acronym for this.
What is National Council for Interior Design Qualifications
100
The primary model building code in the United States.
What is the international building code (IBC)?
100
The minimum height of a guard rail.
What is 42"?
100
MDF abbreviates this.
What is medium density fiberboard?
100
Fabric made from the flax plant.
What is linen?
200
Detailed scaled drawings that the contractor uses to complete the construction of a project
What are construction drawings?
200
The clear width of an exit door.
What is 32"?
200
The absolute minimum corridor width in a non-residential project.
What is 44"?
200
Sawing lumber mostly perpendicular to the tree rings in a quarter section of a log.
What is quarter sawing?
200
Highly figured metamorphic rock converted by heat and pressure from limestone.
What is marble?
300
This consultant is responsible for designing openings in the floor of an existing building.
What is a structural engineer?
300
The distance an occupant must travel from the most remote part of a building to the nearest exit.
What is exit access travel distance?
300
The maximum rise between landings for a ramp.
What is 30"?
300
Molding installed end to end.
What is running trim?
300
Type of carpet typically used to produce complex patterns with different surface textures.
What is a Wilton carpet?
400
The standard format for these are divided into three sections?
What are specifications?
400
An area of a building where persons unable to use a stairway can wait for instructions and assistance
What is an area of refuge?
400
The maximum projection of a door into an egress corridor?
What is 7"?
400
A piece of wood used to fit a cabinet to an irregular wall.
What is a scribe piece?
400
Precise measure for furniture foam firmness.
What is load deflection?
500
This person is responsible for estimating the construction time of a project.
Who is the contractor?
500
The maximum percentage of wall or ceiling that combustible trim may occupy?
What is 10%?
500
The standard test for determining surface burning and smoke developed characteristics of finish materials?
What is the Steiner tunnel test?
500
Wood veneer less than 0.036" thick is exempt from these requirements.
What are flame spread requirements?
500
Three ways to attach fabric to cushioning.
What are buttoning, tufting, and channeling?
M
e
n
u