Dwelling Units
Bathrooms, Outdoors, Basements and Kitchen receptacles must be protected with this device.
GFCI
Article 210.8(A) (1-12)
This is the total degrees of bends allowed within a run in between pull points.
360 degrees
Artilce 358.24(B)
An area including a sink with one or more of the following: a toilet, urinal, tub, shower or bidet.
Bathroom
Article 100
This is the distance where receptacles are installed within the outside edge of the bathtub or shower stall that are required to be GFCI protected.
6'
Aritcle 210.8(A)(7)
Rigid Polyvinyl Chloride Conduit shall be securely fastened withing ____feet of an outlet box.
3'
Article 352.30(A)
a compartment or chamber to which one or more air ducts are connected and that forms part of the air distribution system.
Plenum
Article 100
This is the branch circuit rating for a bathroom.
20 Amp
210. 11(C)(3)
This is the maximum distance between Rigid Metal Conduit supports (in straight runs) of 2".
16'
Table 344.30(B)
Rendered inaccessible by the structure or finish of the building.
concealed
Article 100
20"
Article 210.52(C)(3)
Flexible Metal Conduit trade size 1/2" shall not be used in lengths not in excess of ______ for utilization of equipment.
6'
Article 348.20(A)(2)(a)
an enclosed channel designed expressly for holding wires, cables, or busbars, with additional functions as permitted in this code.
Raceway
Article 100
120
Article 210.8(C)
LFMC is required to be supported within ____ of each box.
12"
350.30(A)
connected to ground or to a conductive body that extends the ground connection.
Article 100