This is an example of a small network, usually used for home networks.
What is Local Area Network (LAN)?
100
This switching comand determines the MAC address of a directly attached network device on a particular interface
What is the show interfaces command?
100
This is the command to enter into global configuration mode.
What is configure terminal?
100
This Network Characteristic has two versions, physical and logical.
What is topology?
100
This type of static route is useful when connecting to a specific remote network
What is Standard Static Route?
200
This is a bigger network, used for big businesses and schools.
What is Wide Area Network (WAN)?
200
This divides the network into manageable portions.
What is subnetting?
200
This command displays the contents of the vlan.dat file.
What is show vlan brief?
200
This network characteristic is a measure of the data rate in bits per second.
What is Speed?
200
This route matches all packets and identifies the gateway IP address to which the router sends all IP packets that it does not have a learned or static route
What is Default Static Route?
300
This layer of the OSI model ensures that messages a sent error free, in sequence, and with no losses.
What is the Transport Layer?
300
This is the OS that Cisco hardware uses
What is Cisco IOS?
300
This command sets a certain port to the access mode.
What is switchport mode access?
300
This is a common packet forwarding mechanism which uses a fast switching cache to stare next hop information.
What is Fast Switching?
300
This is a summary of multiple static routes into a single route
What is Summary Static Route
400
The fundamental concept of switching refers to a device making a decision based on these two criteria.
What is Ingress Port and Destination address?
400
This is the first part of the switch boot process.
What is the POST test?
400
This command removes the VLAN assignment from a certain port.
What is no switchport access vlan command
400
Identifies the router to send a packet to when the destination is not on the same local network subnet.
What is Default Gateway?
400
This route is a static routes that is used to provide a backup path to a primary static or dynamic route, in the event of a link failure.
What is Floating Static Route
500
This is a combination of the functionality of the access, distribution, and core layers.
What is a collapsed core?
500
This type of communication both sends and receives data simultaneously.
What is Duplex communication?
500
This is an OSI Layer 2 link between switches that carries traffic for all VLANs.
What is a VLAN trunk?
500
This is a manually assigned IP address, subnet mask, and default gateway.