Switching
When a switch receives a PDU with a destination MAC addresses that is not in its MAC table, it will ____ the PDU.
Flood
Arp request is sent in order to obtain...
MAC address
The layer number of the Data-link layer in the OSI model
2
The layer number of the physical layer in the OSI model
1
A networking device that forwards data between remote networks
Router
the MAC address table maps MAC addresses to...
interfaces
The destination MAC address in an ARP request
FF:FF:FF:FF:FF:FF
The name of a PDU that has a Data-link layer header and trailer.
Frame
The amount of data that can be transferred from one place to another through a communication medium in a unit of time.
Bandwidth
A data base stored in a router that lists the routes to particular network destinations.
Routing table
The amount of bits in an ethernet MAC address
48
When sending data to a remote network, the local host will try to resolve the MAC address of this device.
Router/Gateway
In this type of communication both devices can transmit and receive on the media but cannot do so simultaneously.
Half-Duplex
A disturbance caused by the electric or magnetic fields of a signal on one wire to the signal in an adjacent wire
CrossTalk
A route used by the router when no other known route exists to transmit the IP packet.
Gateway of last resort/ default static route
When receiving a PDU, the first thing a switch will do is...
Add the source MAC address to the MAC table
The OSI layer to which ARP belongs
Data-link
The 2 sublayers of the Data-link layer
Logical Link Control (LLC)
Media Access Control (MAC)
This cable combines the techniques of protecting against EMI and RFI, and wire twisting to counter crosstalk.
Shielded Twisted Pair
s 0.0.0.0 [1/0] via 209.165.200.206, GigabitEthernet 0/0/1
How was the routing entry above learned?
Statically configured
A multicast MAC address always begins with...
01-00-5E
The command used to view the ARP table on a windows host
arp -a
Wireless networks use this media access control method
Carrier sense multiple access with collision avoidance (CSMA/CA)
The most common type of networking cable. It is commonly used to interconnect a host to a switch and a switch to a router
Ethernet Straight-through
O 192.168.1.0/24 via 192.168.10.2, serial 0/0/0
This routing table entry was learned by which dynamic routing protocol?
OSPF