Set-Up
The “____ ____” is the part of the Newman that allows and regulates the vials onto the conveyer to be labeled.
Gate motor
How many challenge vials are required to run a vision system challenge?
16
Labels with print that are removed during post-labeling activities during campaigning are places here.
Label Reject Sheet
How many times must a rejected labeled vial be inspected before it can be considered good and placed back on the outfeed turntable?
%200
Which is the only market that has a label length that is different?
Australia
During set-up, approximately how many vials must be processed prior a pre-run challenge, if no campaigning is occurring?
15
Which SOP step is required when campaigning?
A: Clean the printer head
B: Check machine clearance with a challenge vial
C: Retrieve the “set up/challenge” vial set
C: Retrieve the “set up/challenge” vial set
How many labels fit on a “Reject label Sheet”?
50
Operators must adjust the coder and/or Systech Vision System camera horizontally/vertically to ensure the lot and expiration date print in the “____” area of the label.
Non-Varnished
These 3 instances require a vision system challenge to be performed.
Pre-run, post-run and vision system interventions
This is the purpose of campaigning.
To reduce the amount of set-up and breakdown time.
An operator must be “____” to perform the 200% check on rejected vials.
Qualified to run the Newman Labeler.
This must be done after challenges but before labeling production vials begins.
Obtain a printed label for a sample
What is the process if a challenge fails?
Identify and fix the issue. Document in Oracle. 3 additional successful challenges must be performed.
This is the most important part of post-labeling campaigning steps.
Remove all printed labels from the machine to ensure no cross contamination.
While doing a label splice, the correct orientation of the 2 label backings are "___ ___ ___".
New over old