Grinding Wheels
cardboard circle that has information about a grinding wheel
What is a blotter
The plate at the top of the wheel
What is a Spark Arrestor
List five drill press safety guidelines?
What is to be determined.
What is spotting and why is it performed?
What is After the workpiece is positioned and securely clamped, a center drill or spot drill is usually used to create a more positive starting point for a twist drill.
the number that states how course or fine the grinding wheel will be.
What is the grit number
Supports tools for grinding
What is a Tool Rest
Briefly define the term cutting speed
What is cutting speed is the distance that a point on the circumference of a rotation cutting tool travels in 1 minute
What is pecking or peck drilling?
What is Retract the quill frequently to remove chips from the point of the drill.
Has the face of the wheel on the side
What is a tool grinder wheel
Sandwiches on either side of the grinding wheel
What is are the wheel flanges
What unit of measure is used to define cutting speeds?
What is it is stated in surface feet per minute.
What drill press component can be used to control counterbore depth?
What is depth stop.
Briefly describe what should be done on start up
What is stand to the side of the grinder
Attached under the grinder to the floor
What is the pedestal
What is feed, and how is feed stated for drill press operations?
What is feed refers to the movement, or advancement, of the cutting tool into the workpiece. and reed rate is the term used in the shop to describe this.
Done before installing a new grinding wheel
What is a ring test
Max setting for spark arrestor and tool rest
What is 1/16"
Briefly describe two methods for location hole position on the drill press?
What is center finder or wiggler.