S15 - Line Break
This person is required whenever a line break involving hazardous materials is performed and must observe the line break and summon aid in the event of an incident.
What is a safety attendant?
Site's EAPs must be tested this often each year.
What is twice? (at least two drills, one of which must be live and include all shifts)
The minimum level of cut resistant glove/sleeve required to be worn at the plant?
What is 4.
This component of a fire extinguisher prevents unintentional activation of the extinguisher.
What is a ring pin? (or pin)
This behavioral safety program was implemented in Ingredion to increase/improve communication and to positively impact working behaviors.
What is SafeStart ?
The name of the software used at the plant to worn personal of an emergency situation?
What is AlertMedia.
This class of fire extinguisher should be used in electrical fires.
What is a Class C extinguisher?
This device is installed in areas to diagnoses and treat life-threatening cardiac arrhythmias of ventricular fibrillation and pulseless ventricular tachycardia.
What is an AED?
These devices are commonly used to prevent accidental discharge of a line and a record of their installation shall be kept on line break permits.
What are blanks/blinds?
This type of event involves either current or imminent attention from the media, including social media, and other external audiences.
What is a crisis?
Practicing this type of plan with your family at home can increase the positive outcome of a fire related incident.
What is an escape plan?
This is the temp. threshold for any material to require a line break permit.
What is 120 F / 48.8 C?
If any of the following occur, this is required.
- an employee's responsibilities or designated actions under the plan change
- when significant changes are made to the plan(s)
- when an employee does not participate in at least 1 live drill during the year.
What is retraining?
The four states in the SafeStart state to error pattern. |
What are rushing, frustration, fatigue, and complacency?
This 4 step method is commonly trained to ensure proper use of a fire extinguisher. Also known as..
What is the P-A-S-S method?
This is the pressure threshold for liquids to require a line break permit.
What is 75 psig?
A review of the sites emergency action plan should occur at this frequency.
What is once per year?
Per Ingredion Event Alerts this type of tool should be equipped with an; anti-kickback clutch, soft-start vibration reducing handle (where allowable), rapid braking system, noise reduction disk, adjustable guard (not removable guard), and a safety cut-off switch.
What is an angle grinder?
This Ingredion value houses our core beliefs around environmental health and safety.
What is Care First?