"Keep aisles and passageways clear of trash, materials and equipment" - what type of hazard does this concern?
Slips, trips, falls.
What is the most common type of injury
Ergonomic
This PPE protects against top impacts
HardHat
A __ft rule check is reqd. before hotwork
35
Never put sharp tools in your ____
Pocket. Also consider not leaving it in tool bag
Sweep
Line pull
etc
Slip hazards can be helped if you replace ____ when the soles get worn
List at least 3 reqd. basic PPE
Hardhat, Safety Glasses, Steel or composite toe boots, Hearing protection.
What color hooks are for Gas and Oxygen lines.
Yellow
Give two examples of stored energy
Pnuematic/air
Electrical
Gas
mechanical
A weld line has been compromised and the wires are showing. What are two major hazards this poses?
Fire and shock
Who is responsible for inspecting Fall-Pro before use
The user/YOU
What is the approval rating for safety glasses
ANSIZ87+
This type of clothing Should not be worn during hot work.
Synthetic clothing like polyester
This website is used to document ,track, and eliminate safety issues
ObserveNNS
A oxy-propane line is seen tied together with temp lights. Is this wrong? Why?
Yes, It poses a fire hazard.
You are climbing a ladder and you bump your head into a wood plank used for staging above. What type of injury/hazard was this?
Struck by
For Fall Protection harnesses, you are allowed to share it if the other mechanic is also qualified. True or False
False
T or F? Inert gasses like Argon or Helium are flammable.
FALSE
Most Non hazardous waste goes to Stop ___
550
when climbing a ladder, you need _ points of contact
What document can you find the chemical properties and its hazards by request?
Safety Data Sheet (SDS or MSDS)
there should be no more than a __" gap between your face and your safety glasses.
1/4
A Class B fire is?
Fires involving flammable liquids like gasoline, oil, and grease.
Hazardous waste is managed by the Onsite Hazardous Waste Contractor ________________.
Clean Harbors