In order to enter the Vibro work area on the North Dike, You must call this person? On what channel?
What is Vibro Supervisor on channel 33
100
Fire watch is done for this period of time after any hot work has been conducted?
What is 2 hours (30 minute intervals)
100
Work/tasks are not permitted in both the Nuna & Bauer shop when winds exceed this speed?
What is 70km/h
200
When approaching a HME I must make radio communication with the operator before approaching at this distance?
What is 50 meters
200
Crane operation is not permitted in wind speeds exceeding ___?___ Km per hour unless the lift has been identified through a documented risk assessment. The risk assessment must be completed and signed of by both area and safety superintendents.
What is 50km/h
200
Where is the primary muster point at A21?
What is A21 Offices
300
All HME operators that work on the dike are required to wear a PFD and have a specific emergency tool (within easy reach of the operator) in the event of a rollover into the water to help the operator escape safely.
What is hammer/seat cutter tool
300
Fall protection gear, permit, and training are required when working above this height?
What is 6 feet
300
In regards to the A21 Offices where is the nearest large eye wash station located?
What is Bauer Shop
400
The minimum travel distance to HME whilst trailing will be maintained at this distance in meters?
What is 100m
400
For a confined space permit the following documentation must be completed; Take5/FLRA, JHA, Confined Space Permit, & _______?
What is a rescue plan
500
A Cement Truck, 930K loader and a Vac truck are all stopped at a 3-way intersection. Who has the right of way?
What is 930K Loader (Support equipment includes; loaders, graders, tele-handlers, other non-highway equipment)
500
I must run a zip cut disk at full speed for at least this specific amount of time before beginning a task that requires a zip cut disk.