CAR-T Processes
This is the input for Day 3 Process
What are Activated T-Cells?
This is the first item to check when obtaining your process kit
What is the kitting form?
This is the gowning required to enter the Cell Culture Room
What is a White Lab Coat and a new pair of gloves?
This is the first gowning you put on to enter the CNC corridor
What is a bouffant?
This is how many days it takes a Bleach Bottle to expire
What is 30 days?
This is the amount of days it takes to fully complete a patient batch from beginning to end
What is 11 days?
This is the procedure for wiping in a 'dirty' clean room cart from the Mal-In
What is Bleach (10 min contact time), SporKlenz (10 min contact time), and IPA?
This is what happens when your glove rips inside the BSC and LFG
What is plating yourself and replacing your glove?
This is how many passthroughs are in the CNC Corridor
What is 10 passthroughs?
This is what C.A.R.T. stands for
What is Chimeric Antigen Receptor T-Cell Therapy?
This is the number of wipes per side used to clean a BSC
What is 1 wipe per side?
These are the 2 disinfectants used to wipe in equipment into the C-Space
What is bleach and sporklenz?
What is covering your nose?
This is used to transport samples from the CNC corridor to QC Lab
What is a biohazard tote?
This is the first thing you must do prior to begin your morning process in the designated process room
What is checking the daily cleaning crew log book?
This is what impacts dose
What is patient weight, viable cell concentration, & LICAR?
This is the equipment used to separate supernatant from the cells in D10 Form Fill
What is the centrifuge?
This is the time-frame until your Grade B gowning expires inside the B Space
What is 6 hours?
This is what you must do if passthrough door lights were red when opened
What is contact management?
This is the technique for cleaning a kit for any process day
What is..
1. Bleach entire tote (10 min contact time)
2. Once inside C Space, open tote to be bleached inside and out
3. Once tote has met 10 minute contact time, IPA entire tote and rip the outer most layer of the kit and IPA
4. Place IPA'd kit inside tote and fill out your kitting form
?
This is what isolates the T-Cells during the D0 Prodigy Process
What is the magnetic beads?
This is the amount of time that your TSA Plates can remain open
What is 3 hours and 45 min?
This is what happens when Grade B Gowning is ripped inside B Space
What is exit plating and gowning out to regown back in?
This is why the Phase 3 CNC Corridor requires gowning as opposed to the Phase 2
What is due to handling patient samples via process room passthroughs?
This is the new technique for cleaning your Grade B Gowning
What is...
1. Place your dirty gowning on the bench
2. Wipe the rack with IPA
3. Placing your dirty gowning on the clean rack
4. Wipe your IPA pack with IPA and place onto the clean rack
5. Wipe the bench with IPA
?