what is the standard number associated with the PPE OSHA subpart
1926.28
100
Fall protection is needed when working at or above this height in construction
What is 6 feet or more
100
These types of tools are non-motorized tools used in general construction
What is hand tools
100
what are the 3 main categories of ladders used in construction?
What is Straight ladders, A-Frame (stepladders) and Extension Ladders
100
what does OSHA stand for?
Occupational Safety and Health Administration
200
Hard hats shall be worn whenever there is an exposure of this on a job site
What is overhead hazards
200
At what height does OSHA require fall protection on scaffolds?
10 feet or more
200
These types of power tools usually do not have a ground prong at the end of a cord
What is double insulated tools
200
At or above what height do you need fall protection on a ladder
What is 24 feet
200
This is the book that references all OSHA construction standards
29 CFR 1926
300
What TWO things must be completed before any employee is allowed to wear a respirator ?
What is a Fit test and Medical evaluation
300
Describe the difference between a personal fall restraint system and a personal fall arrest system
What is PFRS will not allow you to fall, only allows employee to get close to an edge, PFAS will allow the employee to fall but will stop them well before they reach the ground.
300
Face shields are always required when using power tools that preform this type of work
What is grinding, chipping, welding tools
300
These types of ladders are usually found mounted to the side of commercial buildings or apartment complexes
What is a fixed ladder
300
what are the three ways to file an OSHA complaint ?
Phone, Email, Letter
400
in regards to noise exposure, at what db limit will an employee need hearing protection ?
What is 85 db
400
Guardrails should be built between these measurement heights to be in compliance with OSHA standards
What is 39" to 42"
400
This federal organization rates and reviews all power tools that are sold by manufactures
ANSI ( American National Standards Institute)
400
What is the most common cause of general construction ladder accidents ?
What is Overreaching
400
In what year was the OSH act signed ?
What is 1971
500
Safety Glasses that are rated by ANSI will have this number etched in the frame of the glasses
What is Z87
500
What are the 3 main components to a personal fall arrest system?
What is body harness, lifeline, anchor point
500
This type of power tool requires employees to be specially trained in order to be qualified to use it
What is Powder actuated tools
500
What are the 3 Main types of weight ratings in regards to ladders (light duty, Medium duty, Heavy duty)