Exit Routes/EAP/Fire
Hazard Communication/Machine Guarding
Electrical
Ergonomics
Review 1
Review 2
100
Only those employees who have received training on the use of a fire extinguisher can be authorized to use a fire extinguisher during a workplace fire.
a. True
b. False
What is A. True
100
How many sections are required on an SDS?
What is b. 16 sections
100
What is Electricity?
b. The movement of the free electron between atoms
100
Ergonomics is the science of ___.
What is designing the job to fit the worker
100
What is the minimum age requirement for the operation of a forklift, regardless of training?
What is 18
100
Affected employees” are those responsible for implementing the energy-control procedures or performing the service or maintenance activities.
True
False
What is False
200
Which of the following statements is TRUE regarding Emergency Action Plans (EAPs)?
a. EAPs need to be written down only if requested by employees.
b. EAPs facilitate and organize actions taken during an emergency.
c. EAPs have no effect on the number or severity of injuries during an emergency.
d. EAPs increase confusion due to the number of documents required.
What is b. EAPs facilitate and organize actions taken during an emergency
200
All machines consist of three fundamental areas, including ______.
a. Flywheels, connecting rods, and transverse moving parts
b. Point of operation, power transmission device, and operating controls
c. Reciprocating parts, rotating parts, and on/off switch
d. Feed mechanisms, auxiliary machine parts, and nip points
What is b. Point of operation, power transmission device, and operating controls
200
Electrocution” means ____.
What is Killed by electrical Shock
200
MSDs account for approximately______ of all injuries and illnesses
What is 33%
200
A way to prevent materials handling hazards is to ___.
a. refuse to allow personnel to ride equipment without a seat and seatbelt
b. report all damaged equipment immediately
c. operate within manufacturer’s specifications
d. all the above
What is D All the Above
200
. The first step in the Lock Out / Tag Out procedure is:
A) Release stored energy
B) Shut down equipment
C) Prepare for shutdown
D) Apply locks and tags
What is Prepare for Shutdown
300
Which of the following elements are required in order for a fire to occur?
a. Sufficient oxygen, fuel, ignition source, and chemical reaction
b. Sufficient fuel, carbon dioxide, heat, and chemical reaction
c. Combustible materials, spark, heat, and mechanical reaction
d. Smoke, heat, flames, and light reaction
What is a. Sufficient oxygen, fuel, ignition source, and chemical reaction
300
Rotating, in-running nip points, reciprocating, and transversing are types of hazardous __ >
a. motions
b. actions
c. guards
d. devices
What is A Motions
300
Arc flash\ark blast can reach maximum temperatures up to 350°F.
a. True
b. False
What is False -temperatures can reach up to 3,500°F
300
Which of the following is an example of an ergonomic risk factor?
a. Neutral postures
b. Rest
c. Repetition
d. Personal protective equipment
What is C-Repetition
300
Hazard controls must be addressed in which order of priority?
a. Substitution, PPE, workaround, and administrative
b. Workaround, stop work, PPE, and engineering
c. Stop work, PPE, engineering, and substitution
d. Substitution, engineering, administrative, and PPE
What is D
300
Which of the following is an example of a physical health hazard?
a. Asbestos
b. Noise
c. Silica
d. Lead
What is B Noise
400
Bonus Question:
How many Lives were lost at the Hoover Dam that were accounted for?
what is 112
400
Cutting, punching, shearing, and bending are types of hazardous ____.
a. motions
b. actions
c. guards
d. devices
what is B Actions
400
What gauge of wire will carry the most current?
What is D 00 gauge/ the lowest gauge
400
Ergonomic hazards can be prevented or reduced by which of the following control methods? a. Engineering controls
b. Proper work practices/administrative controls
c. Personal protective equipment
d. All the above
What is D-All the Above
400
Slips, trips, and falls make up what percentage of all accidental deaths?
What is 15%
400
Which of the following is an example of an industrial hygiene health hazard?
a. Chemical hazards
b. Economic hazards
c. Electrical hazards
d. Fall hazards.
What is A Chemical Hazard
500
What is the Osha 300?
LOG of Work-Related Injuries and Illnesses that needs to be posted for employees to see
500
17. Which of the following explains how a guard protects workers?
a. Stops the machine when a worker enters the danger area
b. Restrains the worker from entering the danger area
c. Creates distance to keep the worker from entering the danger area
d. Provides a barrier to prevent access to the danger area
What is D Provides a barrier to prevent access to danger area
500
What does GFCI stand for?
a. Ground Flexible Conduit Insulator
b. Ground Fault Current Interceptor
c. Ground Fault Circuit Interrupter
d. Ground Floor Connection Intersector
What is C
500
Bonus Question:
What City was the Triangle factory in?
What is New York
500
What is the easiest and most accurate way to use a portable ladder according to the manufacturer?
a. Contact the manufacturer via cell phone
b. Download the material from the internet.
c. Read and follow all warning labels and stickers.
d. Ask a fellow worker.
What is C - Read and follow all warning labels and stickers
500
Bonus Question
Name Two States that have Safety and Health Programs that are ran by state individuals plans and Not by Federal Osha ??
