OSHA
PPE
Fall Protection
Ladders
Hand/Power tools
100

This is a federal official whose duty is to enforce all state/federal labor laws, also will conduct onsite inspections.

What is a OSHA compliance officer?

100

This standard covers all hardhats, work boots, safety gloves, safety glasses etc...

What is the PPE standard?

100

Per OSHA, this is the height at which you need fall protection from the ground or lower platform in construction?

What is 6 feet?

100

This is a step type ladder, that is comprised of safety feet, locking spreaders and multiple steps.

What is an A-Frame ladder?

100

These types of tools have no external power/motors.

What are Hand tools?

200

This act was signed in 1971

What is the OSH act?

200

If you decide and are allowed to take these home and wear them off the job, your employer is NOT required to pay for them.

What are Safety shoes/ work boots?

200

Per OSHA, this is the height at which you need fall protection from the ground or lower platform on scaffolds.

What is 10 feet?

200
You must maintain this at all times when climbing up or down a ladder
What is 3 points of contact
200

These types of tools usually are the cause of most on the job injuries.

What is cutting tools?

300

These are the 3 main ways to file an OSHA complaint.

What is Online, phone, mail?

300

This is the ANSI test rating number for safety glasses.

What is Z87.1?

300

What are the 3 main parts of an OSHA approved guardrail system?

What is top rail, mid rail, toe board?

300

If you are setting up an extension ladder to a maximum height of 12 feet, how far out should you place your ladder base to achieve the proper angle?

What is 3 feet?

300

TRUE or FALSE a

All grinder wheels are of the same rating and can be used with all types of cut off wheels/ grinders.

What is False?

400

This is the expiration date of the OSHA 10 and 30 cards

What is Never?

400

This must be completed before anyone is allowed to use a respirator.

What is medical evaluation?

400

Personal fall arrest system (PFAS) is comprised of 3 different main parts, they are....

What is harness, lanyard, anchor point

400

This type of ladder is used when having 25 or more employees using as only means of access to work area and when serves two-way traffic.

What is double-cleated ladder or two or more ladders?

400

These types of tools usually do not have a ground prong on the end of the cord

What is double insulated tools?

500

These are the Four Groups of OSHA Standards

What is General, Construction, Maritime, and Agriculture

500

DAILY DOUBLE!!!

The employer is responsible for requiring the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions or where this part indicates the need for using such equipment to reduce the hazards to the employees. Find this PPE standard if you can.

What is 1926.28(a)?

500

This is the weight capacity required to be considered an anchor point.

What is 5000lbs

500

Fall protection is needed after exceeding this height on a fixed ladder.

What is 24 feet?

500

These types of tools require special operators training in order to become a competent user. 

HINT: most of these tool manufacture companies will conduct free onsite training to employees.

What is powder actuated tools?

M
e
n
u