PPE
Excavations
Health Hazards
Tools
Hodge Podge
200

What subpart in CFR 1926 covers PPE?

Subpart E

200

What subpart in CFR 1926 covers excavations?

Subpart P

200

What subpart in CFR 1926 covers health hazards?

Subpart D

200

What subpart in CFR 1926 covers Tools?

Subpart I

200

What type of OSHA inspection is conducted when immediate death or serious harm is likely?

Imminent Danger

400

What are two examples of PPE that an employer is required to provide?

Hard hat, safety glasses, hearing protection, goggles, face shields, high-vis vests?

400

The distance interval at which a means of egress shall be provided in trenches?

25 feet

400

The action level at which hearing protection and conservation programs are required? 

85 decibels

400
Electric powered tools should never be raised or lowered by what?
The cord
400

What TWO things must be completed before any employee is allowed to wear a respirator ?

Fit test and medical evaluation

600

How often are rubber insulating gloves required to be tested?

Before first use and every 6 months thereafter

600

At what depth of excavation are ladders required for a means of egress?

4 feet

600

Inhaling crystalline silica can cause what disease?

Silicosis
600

Tools should only be used in the manor  they were ____?

Designed

600

Who was the president who signed the OSH act?

Richard Nixon

800

What is the maximum voltage class 2 rubber insulating gloves are rated to be used on?

17000 Volts

800

What is maximum depth of a excavation before you have to get a P.E. to design and approve protective system?

20 feet

800

How many foot-candles of lighting are required for general construction areas?

5 foot-candles

800

For safe operation , electrically powered tools shall have either of these two safety requirements?

Double insulated or Grounded

800

What is the trigger height for fall protection when working on scaffolds?

10 Feet

1000

This type of PPE must be worn when there is a risk of falling objects, or head bumping into fixed objects?

Hard hats

1000

What are the 3 main methods primarily used to protect employees from cave-ins?

Sloping, benching, and shield systems

1000

What are employers required to provide to prevent inhalation of dangerous/toxic fumes, dusts, and chemicals?

Respirators

1000
What should an employee receive prior to using a powder-actuated tool?

Training

1000

A condition from being cold for too long?

Hypothermia

M
e
n
u