PPE/Health Hazards
When should PPE be inspected?
Before each use
Fall protection is required in construction at this height
6ft
What material composition is used for electrical work
Wood or fiberglass
GFCIs are used to prevent
Shock
A competent person must inspect excavations
Daily
Safety glasses have this ANSI standard written on them
Z87
This type of protection prevents a worker from reaching a fall hazard
Guardrail or Barrier Protection
This step of the ladder should not be used
Top step
GFCI stands for
Ground Fault Circuit Interrupter
Protective systems are required at depths greater than
5 ft
PPE stands for
Personal Protective Equipment
This system includes a harness, lanyard, and anchor point
(PFAS) Personal Fall Arrest System
the 4:1 rule applies to
Extension ladders
LOTO stands for
Lockout/Tagout
Spoil piles must be kept at least ____ feet away
2
Who is responsible for providing PPE
Employer
Falls are the leading cause of
Construction Fatalities
Aside from not being used, damaged ladders should be
Labeled and removed
Electrical panels must be kept clear by this distance
3ft
______________, Shoring, Shielding are trench protective systems
Sloping
What decibel rating does OSHA say hearing protection is required
90 Decibels
Guardrails must include
Top rail, midrail
This type of ladder should not be used when leaning against a wall
Step ladder
These must be free from damage and have grounding prongs intact
Extension Cords
Access/egress for a trench is required every
50ft