Managing Safety and Health
Material Handling
Powered Industrial Trucks
Welding and Cutting
Confined Space
100

A SHMS

What is a Safety and Health Management System?

100

Gears, chains, sprockets, and set screws.

What must be guarded?

100

Less than 18 years of age.

Who is not allowed to operate a powered industrial truck?

100

Cylinders must be stored upright.

What is acetylene?

100
A confined space that contains a hazard;

Atmospheric Hazards

Ingulfment hazards

Entrapment hazards

Other recognized serious S&H Hazards.

What is a permit required confined space?

200

A worksite safety policy, established safety goals, and top management involvement.

What actions demonstrate management commitment?

200

Name of the manufacturer, rated capacities for the type of hitch, and material construction.

What marking should be on a sling?

200

Daily if used every day or before use if used infrequently.

How often must a PIT be inspected?

200

Cyinders must be stored at least 20 feet from fuel gas cyliners.

What is an oxygen cylinder?

200
Must be completed before entry.

What is a confined Entry Permit?

300

Employees must do this without fear of reprisal.

What is reporting workplace hazards?

300

Eliminates trailer creep or movement of the trailer.

What are wheel chocks?

300
It produces carbon monoxide, which may be a problem in a closed warehouse.

What is a propane or gasoline powered PIT?

300

Must be in place for at least 30 minutes after the operation is completed.

What is a fire watch?

300

Must be present at the confined space entry point during a PRCS entry.

What is the attendant?
400

Facilites

Processes

Materials 

Equipment

What do you look at when doing a hazard analysis?

400

May not be tied in a knot to shorten.

What is a synthetic web sling?

400

Requires the placement of an eyewash and shower at the charging area.

What is an electric powered PIT?

400

Type of welding that can cause electrical shock if improperly conducted.

What is arc welding?

400

Must be worn if the PRCS entry is over 5 feet in depth.

What is a harness and rescue lanyard?

500

Observing a job or task step by step to identify hazards involved.

What is Job Hazard Analysis?

500

Must be kept clear and in good repair with no obstructions that could create a hazard

What are the requirements for aisles and passageways?

500

Employee operating unsafely

Involved in accident or near miss.

Assigned to a new type of truck.

Every 3 years.

When is PIT retraining required?

500

Main wavelength of light created by welding operations.

What is ultraviolet light?

500

When the hazards of the PCRS can be eliminated without entry into the confined space allowing for entry without the full PRCS procedures.

What is reclassification?

M
e
n
u