Aerial Lifts
The recommended frequency for retraining employees on aerial lifts.
What is every 3 years.
Process to dissipate static electricity when dispensing flammable liquids.
What is bonding and grounding?
Does not need to be locked and tagged out as long as power source remains in direct control of employee.
What are equipment that only power cords?
Minimum distance from working surface/floor when items are required to have machine guarding.
What is 7 feet.
Fall distance at which fall protection is required for general industry.
What is four feet or whenever working above hazardous equipment.
The documents that must be located on each aerial lift.
What is the manufacturer's operator manual and ANSI manual of responsiblities?
Form to use when performing welding or torching work outside of a designed weld/torch area.
What is hot work permit?
Classification (or name) of employee category that is permitted to perform lockout/tagout operations.
What are authorized employees.
Openings on guards (such as fans) must not be larger than this.
The minmum distance that an extension ladder must extend above a landing surface (such as a roof).
What is 3 feet?
Hazardous condition that could occur when an employees hangs too long in a fall harness.
What is suspension trauma?
Must be mounted, identified and always accessible in the event of a fire.
What are fire extinguishers?
The frequency for which lock out / tag out procedures must be inspected/audited.
What is annually?
What is 1/8 inch?
Type of a fall protection system that keeps an employee from getting too close to fall hazard.
What is travel restraint system?
Type of lift that does not require fall protection.
What is a man lift or scissors lift?
Class of fire material that includes ordinary combustibles like wood, paper, etc.
What is a class A fire.
LOTO process when multiple employees are performing work on a piece of equipment.
What is group lockout/tagout.
Most preferred type of guard to be used.
What is a fixed guard?
Height for a toprail on a standard guardrail system.
42 inches plus or minus three inches.
Recommended minimum distance to stay away from overhead power lines.
What is at least 10 feet?
Minimum vertical distance clearance between material and sprinkler heads.
What is is 18"?
Must be completed for employees whenever there is a new job assignment or there are changes in the lockout control methods.
What is re-training.
Machine designed for a fixed location must be...
What is securely anchored to the work surface to prevent walking or moving.
Year by which all fixed ladders must have a personal fall arrest ladder safety system installed on it.
What is 2036.