Hand tools
Who is responsible for safe tools on a job site
who would be the employer
For safe operation , electrically powered tools shall have either of these two safety requirements
what are , either be double insulated or grounded in accordance with subpart K of this part
What is the minimum requirement for safety glasses
What is ANSI Z 87.1
What was the year the OSH act came to be
what is 1970
Which of the following tools is the least dangerous
1 - pneumatic power tools
2 - a belt sander
3 - a gas powered chain saw
The correct answer is, any power tool can be equally dangerous if used improperly
Wooden handles of tools should be free of this hazard?
what are splinters and cracks
Hoisting or lowering tools shall not be permitted using this
What is the power cord for the tool
What is the least important PPE to be used on a job site
There isn't one, all PPE are equally important
Who was the president that signed the OSH act into law
who was President Richard Nixon
On all fixed power driven wood working tools, this must be provided
What is a disconnect switch that can be either locked or tagged in the off position
Wrenches, including pipe wrenches and sockets should not be used when this happens
what is that the jaws are sprung to the point that slippage occurs
Compressed air should not for cleaning purposes except where the pressure is reduced to this
What is 30 psi
Employees working in areas where there is possible danger of head injury from impact must have this provided
What is a protective helmut
OSHA defines this as a series of lessons addressing specific topics to teach hazard awareness
What is a "course"
When are OSHA cards required to be given out
What is upon the cards being received by the trainer
Impact tools , such as drift pins , wedges and chisels , shall be kept free of this
What are mushroomed heads
What is the minimum time allotment for power tool training
What is 30 minutes
Safety nets shall be provided when workplaces are above this height
What is 25 ft
Trainers cannot serve this while providing training activities
What is alcohol
This person does not need to have an OSHA card, but meets all of the requirements
what is an OSHA certified trainer
Employers should not issue or permit this
What is the use of unsafe hand tools
On a jack, this shall be legibly marked on the tool
What is the manufactures rated capacity
Employees working over or near water, where the danger of drowning exists, shall be provided with this
What is an approved US Coast guard approved life jacket
OSHA defines this as an offering of either 10 or 30 Outreach course
What is a "class"
Inappropriate behavior, activities or lack of professionalism fall under this
What is called the 'trainer code of conduct'