Slips, trips & Falls
A way to avoid tripping
What is to make sure you can see where you are going
Worksite procedures for proper use of respirators are part of what program
What is the employer's respiratory protection program
Responsible for making sure the load and equipment stay clear of obstacles
Who is the person operating the material handling equipment
True or False Selecting the right respirator depends if it will be used for only a short time
False. it depends if it will be used in an atmosphere that's immediately dangerous to life & health
All of the above
Slips are more likely to occur when you don't pay attention or
When you hurry or run
Two general types of respirators
What are Atmosphere-supplying and air-purifying
Frequent inspections of Cranes and derricks are required
What is daily to monthly
True or false. When lifting near capacity loads equipment operators test the safety data sheet for the load
False. Operators must test brakes when lifting near capacity loads.
Which of the following is the direct cost of an incident? a-lost production, b-retraining of new workers, c-physical examination
c-physical examination
This can occur when gravity takes over if you move off your center of balance
Falls
Evaluates an employee's physical ability to wear a respirator
who is a physician or licensed healthcare professional
Your action if you aren't operating an overhead or gantry crane
what is to stay clear of the area where loads are being moved
True or False: If using a ladder that is not tall enough, you should stand on the top step or rung of the ladder and reach up.
False: get a taller ladder
what is the core element of a safety and health program? a- management/leadership, b- worker participation, c. all of the above
c-all of the above
What can occur when your foot hits an object while walking
What is trips
Which of the following is not true about fit testing: a-Fit testing must be done annually,b-The type of fit test depends on the type of respirator,c-You can be fit tested if you have facial hair between your skin and the facepiece
You can be fit tested if you have facial hair
To plan the lift, the equipment operator must understand the characteristics of the load including what
What is the center of gravity
True or false: Warehousing industry has the highest fatality rate of all industries.
True
Employers must correct all identified hazards, however, which of the following should be addressed first? a-missing guard on equipment used every 6 months, b-broken rung on ladder used daily by the entire crew, c-loose handrail on dozer, used by a single operator
broken rung on a ladder used daily by entire crew
Slips, trips & falls involve what 3 laws of science
What are Friction, Momentum & gravity
This should be done each time you wear a tight fitting respirator
What is a positive and a negative pressure check
The clearance distance when lifting loads near energized overhead lines
What is 10' w/increase in distance if line is > 50 kilovolts
True or false: If your job requires you to manually guide loads in place, it's OK to use your hands
False: use tag lines because a shifting load can crush your hands
Who is responsible for your company's safety and health program? a-CEO, b-safety officer, c-everyone
c-everyone