regulators
what does the higher calibrations on a two stage regulator indicate?
What is cylinder pressure
How to safely move cylinders
What is a Dolly?
This is turned before the valve of the cylinder is open to prevent damage to the regulator.
What is the Adjustment Screw?
A hand tool used to safely light welding and cutting torches
What is a Striker?
When lots of popping is present during a cut, I need this tool.
What is a Tip Cleaner?
how are oxygen fittings identified and what colour hoses are used
What is right hand threads with green or black hoses
This is used to find leaks.
What is Soapy Water?
This is used to remove the harmful vapors.
what determines the correct cutting tip size
What is material thickness
This line is easy to forget when cutting out parts.
What is Kerf?
The safe, regulated gas pressure delivered from the regulator to the torch during cutting or welding.
What is the working pressure
As a safety precaution, this is used to keep cylinders in place.
What is Chain?
This fireproof layer
What are Leathers?
I need this tip to remove excess metal.
What is a Scarfing Tip?
This is used to get the right angle for your cut.
What is an Angle Finder?
how are acetylene regulators and connections identified
What is grooved hex nut
What is a Cap?
what has to be closed first to bleed the lines on an oxy-fuel gas torch setup
What is cylinder valves
This is used to remove water from metal.
What is Sweating the Metal?
This adjusts the delivery pressure of oxygen or fuel gas (like acetylene) flowing from the cylinder to the torch by changing internal spring tension against a diaphragm.
What is the Adjustment Screw?
how much pressure does a full size oxygen cylinder contain
What is 2000-2200psi
This can not be stored with in 20ft of acetylene.
What is Oxygen?
what element is required in order to use the oxy-fuel process
iron (FE)
when oxy-fuel gas cutting, how far should the preheat flames be held from the surface
What is 1/16" to 3/16"