Operations
WHICH VALVES NEED TO BE OPENED FOR SELF LOAD ON THE M969?
G,B,E,D
ENGINE COOL DOWN TIME
5 MINUTES
Allows fuel flow to filter/separator
Valve M
Allows fuel flow to bulk fuel delivery
Valve F
WHAT IS THE #1 CAUSE OF A FIRE
CIGARETTES (SMOKING) & MATCHES/LIGHTERS
WHICH VALVES NEED TO BE OPENED FOR HOSE EVACUATION?
A,G,E,K,P OR R
HOW LONG SHOULD YOU HOLD THE PRE HEATER SWITCH FOR
1 MINUTE
Allows emergency shut down of fueling operations
Valve A
Self-loading control valve
Valve E
IN THE EVENT OF A FUEL LEAK USE
DRIP PAN
WHICH VALVES NEED TO BE OPENED FOR FILTERED BULK DELIVERY?
B,K,H,A,M
Do not hold the starter switch in the START position for more than
10 SECONDS
Bulk delivery control valve
Valve B
Allows fuel flow through manifold to pump
Valve H
PREVENTS STATIC CHARGE FROM COLLECTING ON THE SURFACES OF EQUIPMENT
GROUNDING
WHAT VALVES NEED TO BE OPENED FOR SELF LOAD ON THE M967?
B,A,G,E,D
AFTER ENGINE STARTS WHAT SHOULD THE RPM BE ADJUSTED TO & WHAT IS THE MAX OPERATING SPEED
1000-1200 RPM
2200-2400 RPM
Loading precheck control valve
Valve D
Allows fuel flow to hose reel cabinet
Valve K
WHEN A SPILL IS DISCOVERED YOU MUST
REACT
HOW DO YOU PERFORM RECIRCULATION OPERATION?
HINT: TRUCK IS ALREADY STARTED & DO NOT PERFORM SHUT DOWN PROCEDURES.
*STATE IN ANY ORDER
D-1 NOZZLE HOOK UP TO RECIRCULATION PORT (OPEN VALVE ON NOZZLE) OPEN A,H,M,P OR R ADJUST THROTTLE TO 2200-2400RPM RECIRCULATE FOR 3-5 MINS OR HALF OF THE PRODUCT. PERFORM DURING PMCS (GLUV).
Turn starter switch to START position while holding What
the pre-heater switch
Allows water to drain from manifold.
Valve J
Allows gravity unloading and self-loading
Valve G
What must be removed from brackets and brought to the point of operation
FIRE EXTINGUISHER