PPE/Safety
This piece of equipment is used when putting BBUs in a lower shelf or when adjusting the feets of racks during SLC
What are knee pads?
This is the first thing one does when starting the SLC process on a rack.
What is claim the rack on IGO?
After scanning rack serials and completing the checklist, labels are placed here on the rack.
What is top of the rack and back of the rack?
What are electrical vaults?
All incoming rack deliveries and potential turn down/moves are found here.
What is DC Console?
The specific restriction placed on an associate using a step ladder during rack receiving — even if they need to reach higher.
What is not reaching above their head to remove bolts?
This particular piece of PPE is required when working inside the data halls.
What is ear protection?
These are the 2 conditions that all rack legs on the dock must be before depalletizing.
What is raised/up and taped?
This is done every time after all racks have been received and ran into their correct destination.
What is putting the dock back into its original state (cleaned) and dunnage loaded on correct truck?
The minimum number of functioning latches required on a BBU case before it is considered acceptable for use.
What is 3 (out of 4)?
This is the needs to be done to all damaged or broken MHE
What is placed in quarantine and tagged out?
This needs to happen when placing an orv2 next to another orv2 while SLCing. (Daily Double)
What is one of the racks weatherstrips need to be removed for spacing purposes.
The exact moment during rack receiving when back plate bolts (non red) are permitted to be removed.
What is once the tug is attached and strapped?
These are the items checked in a three way match when receiving a rack.
What are ship to address, physical count of racks, and shreq number/asn file?
The color of light that should appear after pressing the 'chk' button on each BBU during installation.
What is blue?
This is the only acceptable sharp object used to cut material on the dock.
What is a safety blade?
This is what needs to be done to the cable whips on top of a rack.
What is uncoiled and placed over the front of the rack?
The number of ratchet straps required per rack when securing racks inside a trailer.
What is two?
The steps required in IGO to create a delivery when it is not found in the system. (Daily Double)
What are clicking 'Create Delivery' and adding carrier, tracking number, and PO/Shreqs?
This is the training platform for all official Meta courses.
What is Cornerstone?
These are the four mandatory articles of PPE worn during dock operations.
What are cut/crush resistant gloves, safety glasses, ESD straps, hard/alloy toe shoes?
The position gap between a rack and another rack/containment panel is not to exceed this size.
What is 1/2 inch?
This form needs to be filled out before doing any potential dangerous activity on the dock.
What is a LRAW form?
The four specific items the IGO team must record in the logical delivery record during rack receiving.
What are actual arrival time, unload time, and people involved, and seal number?
This is the chain of command for escalating any rack related issues.
What is L2 to L3 to Alex to FTE to SiteOPS (Chadwick)?