buzz
zap
zing
shock
spark
watt
humm
static
100

1000 watts =

1 killowatt

100

a current in which electrons move at an even rate and flow in only one direction is called: 

direct

100

A measure of how much electrical energy is being used is also known as: 

watt

100

a unit of electric resistance is called: 

ohm

100

a volt is a unit of electric:

pressure

100

An ampere is a unit of electric:

strength 

100

an underwriters laboratory (UL) designation indicates:

the appliance has been certified to operate safely under the conditions specified

100

any electrical appliance activated by the flow of electric current such as a blow dryer is known as: 

load

200

dropping an electric appliance into water, making it a foreign conductor causes a:

short circuit

200

electrons travel on a closed path called: 

circuit

200

fires in electrical circuits can occur if:

too many appliances use the same wall socket and overload the circuit

200

Glass, rubber, or paper are examples of what type of material?

insulating materials

200

how many milliamperes equal one ampere?

1000

200

how many watts equal one kilowatt?

1000

200

light, heat, chemical and magnetic changes are all produced by:

electricity 

200

most of the electricity you use daily consists of a flow of tiny, negatively charged particles called:

electrons 

300

since silver and copper transmit electricity, they are called: 

conductors

300

the movement of electricity along a path called a conductor is :

electric current

300

the two forms of electric current are 

AC & DC

300

to avoid the possibility of overloads and short circuits, safety devices are installed in appliances and buildings. two of these devices are fuses and:  

circuit breakers

300

two common sources of electric current are generators and 

batteries

300

volts and frequency needed and watts the appliance consumes are indicated on the: 

nameplate

300

what are the initials used to help you remember fire extinguisher use? 

PASS

300

What type of outlet is recommended for installation in any area where water and electricity could come into contact?

GFCI

400

When a blow dryer is on and air begins to flow, you have an example of a(n):

closed circuit

400

When too many appliances are put on one circuit and are operated all at the same time, more current flows than the line is designed to carry. This is known as:

overload

400

Which action should NOT be done if a fire results from an overload of an electric circuit?

put water on it

400

What changes alternating current to direct current?

rectifier

400

What device breaks the flow of current when an overload occurs?

circuit breaker

400

What material does NOT allow a current to pass through it?

alcohol

400

An amp is a unit of electric:


strength

400

A salon owner wants to balance the tones of light in the salon. Which type of light would likely be incorporated?

incandescent

500

An alternating current that can be adjusted to different voltages to produce heat is:

high-frequency

500

Another name for microcurrent is:

sinusoidal

500

Bacteria that cause skin infections can be killed by:

ultraviolet light

500

Before using ultraviolet light on a client, the skin or scalp should be:

cleansed

500

Depending on its design, which type of light can create blue or cool tones?

fluorescent

500

During scalp and facial massage, EMS Current is used chiefly to cause:

muscle contractions

500

EMS is an alternating current used chiefly during scalp and facial massage to cause:

muscle contractions

500

High-frequency current is an alternating current that can be adjusted to different voltages to produce heat and is also known as:

Tesla

600

How does a cold setting work on a blow dryer?

stops all flow of current to the heating element but still allows current to flow to the blower

600

If a cream is used during scalp or other high-frequency treatments, be sure the cream contains no:

alcohol

600

If the client is holding the active electrode while the salon professional manually stimulates the area being treated, what method of high-frequency current is being used?

indirect application

600

Incandescent light normally produces what color tones in the objects it lights?

redder tones

600

LED devices using blue light help:

 reduce acne

600

Microcurrent treatment should never exceed:

30 minutes

600

Over half of sunlight is composed of invisible rays beyond red, which are called:

infrared rays

600

what is the longest wavelength:

infrared rays

700

Small doses of ultraviolet light may help the body produce:

vitamin D

700

The application of a specific electric current or piece of equipment for corrective and therapeutic benefits on the skin is called:

electrotherapy

700

The application of special currents that have a variety of effects on the skin is called:

electrotherapy

700

The chemical breakdown of the skin caused by intense heat is called:

pyrolysis

700

The direct current used in electrotherapy treatments is:

galvanic

700

The effect that is created when an electric current travels through a water-based solution in order to produce relaxing or stimulating results is known as:

electrochemical

700

The electrode that is negatively charged during an electrotherapy treatment is known as a(n):


cathode

700

The maximum amount of current used in a galvanic treatment should generally not exceed:

2 milliamperes

800

The minimum distance an infrared lamp must be placed from the client’s face during a facial is:

30"

800

The portion of the electromagnetic spectrum humans can see is known as:

visible light

800

The process of forcing an acid or alkali into the skin by applying current to the chemical is called:

phoresis

800

The three methods for using the high-frequency current are direct application, indirect application and:

general electrification

800

Treatment with light rays or waves is called:

 light therapy

800

Using either ultraviolet or infrared light to treat the skin is called:

 light therapy

800

What temporary effect will a negative electrode pole produce when applying galvanic current during an electrotherapy treatment?

 increases blood flow

800

When performing an electrotherapy procedure, what current conductor is used to bring the current from the appliance to the client’s skin?

 electrode

900

When testing electrodes for polarity, the negative electrode will create:

smaller bubbles

900

When using galvanic current, what precaution must a salon professional take in order to prevent injury to the client?

do not use over an area with many broken capillaries

900

When using ultraviolet light for germicidal treatments, how far away from the area being treated should the lamp be placed?

at least 12 inches

900

Which electrotherapy treatment can cause sebum to be broken down or blackheads to be liquefied, as in deep-pore cleansing?

desincrustation

900

Which light source is close to being adopted as the mainstream light source due to falling prices and phasing out of 40- and 60-watt bulbs?

LED

900

What action will produce a mild, stimulating sensation while using high-frequency current?

slightly separating the electrode from the skin

900

What benefit is derived from UV light?

small doses tan the skin

900

Which current has chemical effects that are caused by passing the currents through particular acid or alkaline solutions, then through body tissues and fluids?

galvanic

1000

What is a benefit of using infrared light during a facial?

increases circulation

1000

What is NOT a way for heat to be transferred from one object to another?

phoresis

1000

What is NOT a benefit from the application of the high-frequency or Tesla current?

decreased rate of metabolism

1000

Which term describes using a negative pole or electrode to force negatively charged solutions into the skin without breaking the skin?

anaphoresis

1000

Which following term is also known as actinic light?

ultraviolet

1000

Which treatment infuses water-soluble products for deeper penetration into the skin?

 iontophoresis

1000

Which type of light has the shortest wavelength?

ultraviolet

1000

White light is referred to as:

combination light

M
e
n
u