Drills
Saws
Powering Tools
CAUTION
Random
100
Before you start drilling, make sure the drill bit is ____.
tightened in the chuck
100
Saws with fine blades that are excellent for delicate and intricate cutting are called ______.
Saber (jig) saws.
100
A pneumatic drill is used when there is no source of _______.
Electricity
100
You should never engage this on power tools.
Trigger lock
100
The first step when using a pneumatically powered nail gun for the first time is to _______.
read the manufactures instructions
200
When using a power drill, proper ground fault protection will prevent _______.
electric shock
200
Before you plug any saw into a power source, make sure to check that the _________.
power switch is in the OFF position
200
A Porta-Power is an example of a(n) _______ powered tool.
Hydraulic
200
Before replacing parts such as bits, blades, or discs on any tool, you must _______.
Disconnect the power source
200
The angle grinder is used to grind ______.
Hard, heavy materials
300
Drill bits are held in place by this.
Chucks
300
A power miter saw combines a miter box with this type of saw blade.
circular
300
An example of an AC source of power is ________.
a wall receptacle
300
When using an air wrench, ________.
keep your body stance balanced
300
The adjustable tool rest on a bench grinder should be positioned _____ inch from the wheel.
1/8"
400
Keep the drill's air vent clean with a _____.
small brush
400

Never use a circular saw that doesn't have an upper blade guard because ___________.

the guard protects you from touching the blade

400
On circular saws, the rigid plastic guard protects you from ___________ and ___________.
flying debris and touching the spinning blade
400
If a pneumatic nail gun is not firing properly, before you attempt repairs you must _______.
Disconnect the air hose
400
Some manufactures suggest that each time you use a pneumatic nailer, the air inlet needs _____.
a few drops of oil
500
The pneumatic drill us typically used when there is no source of ______.
Electricity
500
List as many different types of power saws as you can.
Circular saws, Saber saws, reciprocating saws, portable handheld bandsaws, power miter box saws, table saws
500
Most power drills have a pistol grip with a _____ ______ for controlling power.
Trigger lock
500
To prevent electrical shock, power tools should only be operated with the proper _______.
GFCI
500
______ saws have very fine blades, which makes the saw an effective tool for doing delicate and intricate work, such as cutting out patterns or irregular shapes from wood or thin, soft metals.
Saber
M
e
n
u