Drill Types
used when there is no source of electricity
Pneumatic DRill
These "Most used" general purpose saws are designed to cut lumber and boards to size for a project.
Circular Saws
This tool is stationary and is used for grinding, rust removal, and metal buffing. tool rest should be 1/8" from grinding wheel.
Bench Grinder
Before attempting any maintenance on any Pneumatic tool you must ?
Disconnect the air hose
what you must do before you use any power tools
Make sure the power switch is in the off position
Drill that uses a pounding action to drill into concrete or brick?
Hammer Drill
This tool has very fine blades, which makes it great for doing delicate and intricate work, such as cutting out patterns or irregular shapes from wood or thin, soft metals.
Jig Saw or Sabre Saw
This tool is used to grind away hard, heavy materials and for grinding surfaces, such as pipe, plates, or welds.
Angle Grinder
Make sure to Read the manufacturers directions completely before using?
A Pneumatic Nail Gun
Rotary bit that when used can shift around on rough material is called what?
Burr Bit
Battery operated drills are also called?
Cordless drills
This is a very common saw used to cut angles and bevels. combines a miter box with a circular saw
Miter Saw or Chop Saw
Type of palm sander that sands with a circular motion?
Orbital Sander
Common air compressor setting for Pneumatic Nailers?
70-120 PSI
switch on handle of most power tools that will let them keep running without pressing the power switch. Should not be used on most tools
Trigger Lock
This tool is used to tighten or loosen the bits in a drill or drill press?
Chuck key or drill key
This tool is a basic machine used in cabinetmaking and for general cutting. Big flat area makes it valuable fore plywood cutting as well.
Table Saw
This is a stationary power tool that uses a continuous abrasive belt for sanding wood or metal.
Belt Sander
You Must be properly trained and certified to use this tool for the first time.
Powder actuated fastening tool
What you must do in the event of any power tool emergency?
Disconnect from the power source?
This is the mechanism on a drill that holds the bit. Can be keyed or key-less.
Chuck
This tool has one continuous band of flexible steel going around guides at either end.
Band Saw
A power sander with a 9"-12" round sanding area for sanding wood or metal.
Disc Sander
Used for breaking up concrete during demolition work
Jack Hammer
Circular saws are the most common saw in the construction industry what is their lower blade guards designed to do ?
protect you from touching the blade.