Mr. Ed Special
Green
Mimics operational forces during testing.
What is a test club?
Causes propeller blades to bend backwards from direction of rotation.
What is torque bending force?
Used to set air/fuel mixture.
What is the Condition Lever?
Used to measure prop angle.
What is a propeller protractor?
I spy a color in this room...
Yellow
Can delaminate, causing an unusual sound when tapped on.
What is a Composite Propeller?
Pressure differential creating lift causes this twisting to high (coarse) pitch.
What is aerodynamic twisting force?
Provides the smallest blade profile during emergencies in this setting.
What is prop feathering?
Measurement of the magnitude of imbalance.
Inches-Per-Second (IPS)
* Double Jeopardy *How many pairs of Ray-Bans® do I own?
Over 20
Mechanically controlled by the pilot.
What is a controllable pitch propeller?
Causes blades to bend towards airplane's direction of travel.
What is thrust bending force?
Propeller lever must be set at the highest rpm setting during this type of operation.
What is ground and/or beta operations.
Corrosion protection for a certain type of metal after repair.
What is alodine or oil?
My first job out of A&P School was....
Panasonic Avionics Corporation as a Maintenance Service Representative
Is hydraulically controlled.
What is a constant speed propeller?
Strength of speeder spring tends to twist the blades in this direction.
What is low (fine) pitch?
When propeller angle and engine power is controlled by the same lever.
What is prop reversing or beta operation?
Used in smart phones to monitor screen orientation.
What is an accelerometer?
Mario is a master technician for which company?
If question given to Mario, then, How much wood would a wood chuck chuck if a wood chuck chuck wood?
Toyota
or
A wood chuck would not chuck any amount of a wood because a wood chuck cant chuck wood. But...if a wood chuck was to chuck any amount of wood how much wood that woodchuck theoretically chuck?
Im glad you asked:
If a wood chuck was to chuck any amount of wood, theoretically, a wood chuck would chuck as much wood as a wood chuck would chuck if a wood chuck was to chuckith wood.
However:
A wood chuck would chuckith no amount of wood even if a wood chuck was to chuckith wood due to the simple fact that a wood chuck, can not chuck, nor would chuck, any amount of wood because wood chucks dont chuck wood.
BUT,
If a wood chuck wanted to chuck wood and would do what is required to chuck said wood, how much would wood that wood chuck be capable of locating from one location to another?
The question is irelivant. That is the answer to how much wood would a wood chuck chuck. An irelivant amount of wood
Blade angle can be permanently re-pitched by bending.
What is an aluminum propeller?
This causes blades to twist into high (coarse) pitch from centrifugal force.
What are flyweights on the blade collars?
Used to control flow in a system with multiple flow channels.
What is a pilot valve?
This can delaminate and cause problems with imbalance, physical damage, and ice.
Electronic Deicing System or Deicing Boot.