Applied when MFF (Meter Finder Feature) or Mega Sweepstakes messages are used.
What is CALL.
100
Indicates the meter has not been charged and the battery is fully drained.
What is SLEP.
100
Indicates the panelist left the meter charging or in the cradle all day.
What is PLUG/DOCK.
100
A work item topic will be generated every two days that this Qual Edit is present. Meter shows no contact with the CMS.
What is NCON.
200
Meter Clock has drifted more than 5 minutes and the Qual Edit appears at least 2 out of 7 days.
What is MCKR
200
When meter is placed in "Airplane Mode" and the panelist forgets to enable for a day or two.
What is COFF.
200
Will appear when the meter's battery is not holding a charge.
What is LBAT.
200
A Panelist has worn meter for less than 31 minutes.
What is NOMO.
200
A reason you would email PPM Payments Distribution if a panelist was going away for 14 days or longer.
What is to set TI.
300
Occurs when meter is in a poor cellular area and connections are terminated due to poor signal quality.
What is BBFR.
300
This may indicate that the Beacons may be unplugged, damaged or incorrectly placed in home.
What is LOCA.
300
Indicates that the battery was charged for less than 240 minutes for the day.
What is NCHG.
300
Non-Qual Edit Coaching. Something you may say to the panelist over and over and over again related to WMADED.
What is Wear your meter from the time you wake up to the time you go to sleep.
300
This Qual Edit indicates that the meter connected to the CMS to upload data while in the panelists home.
What is CIHB.
400
The compliance chart shows changes directly from on (Dark Green) to off (Red) like tree lights.
What is DSPF.
400
Indicates the meter failed to upload new parameters from the CMS; may be due to marginal cell signal.
What is MULF.
400
The Non-Qual Edit will cause the meter to not connect to the CMS
What is Battery Low.
400
This qual edit appears when 15 Year old panelist has worn his meter for 4 hours in a day.
What is MOTN.
400
When the amount of credited media falls below the specified parameter, this Qual Edit is present at least two times in seven days. The meter needs to be swapped.
What is MICR.
500
Wireless connection has suffered permanent failure and the in-home Beacons can not be detected by the meter.
What is BTFR.
500
Meter did not connect to the CMS during the normal connection interval and is applied the day after the occurrence.
What is MCOW.
500
Occurs normally when the meter is first charged, when coming out of SLEP or LBAT condition, or any time the meter has to reboot itself.
What is MRST.
500
This non-Qual Edit acronym is used when one or more panelist in a HH continuously do not meet the expectation for wearing their meter, resulting in removal from the panel.
What is CFP.
500
This rare Qual Edit appears when processing was aborted on the meter log due to illogical data or transmission errors.