Internal Quality Audit
Lockout/Tagout
Material Handling Safety
Hazardous Material Safety
Work Area Safety
100

The final inspection of product quality is conducted by ____

a. Managers

b. the customer 

c. Shipping Department 

d. OSHA inspectors

The final inspection of product quality is conducted by ____ b. the customer

100
A lockout/tagout system: a. prevents a machine from being energized while fixing it b. allows unauthorized use of important machinery c. protects machines from being stolen d. allows use only by trained personnel
A ockout/tagout system: a. prevents a machine from being energized while fixing it
100
A single pry truck can move a load a. a short distance b. a long distance c. up a steep slope d. through rough terrain
A single pry truck can move a load a. a short distance
100
A hazardous material can be defined as any material that ___. a. Creates a dangerous situation b. harms a person, property or environment c. causes pain d. poses no serious health threat
A hazardous material can be defined as any material that ___. b. harms a person, property or environment
100
Oil spots should be cleaned a. immediately b. within 24 hours c. by properly trained hazmat teams d. by maintenance people only
Oil spots should be cleaned a. immediately
200

A nonconforming part should only be shipped to a customer if.

a. the supervisor approves 

b. the customer waives specification 

c. there are no other parts to complete the order d. the customer has paid the invoice

The final inspection of product quality is conducted by ____ b. the customer waives specification

200
If an operator does not test equipment after it is locked out a. it doesn't matter, the machine is de-energized b. the circuit will not operate c. they should apply a tag stating so d. they should be retrained
If an operator does not test equipment after it is locked out d. they should be retrained
200
You should always know the _______ of any load you move. a. cost b. origin c. weight d. manufacturer
You should always know the _______ of any load you move. c. weight
200
A ____ is a chemical that has been scientifically proven to cause acute or chronic health problems to the exposed person. a. physical hazard b. health hazard c. biological hazard d. radioactive element
A ____ is a chemical that has been scientifically proven to cause acute or chronic health problems to the exposed person. b. health hazard
200
Safe work ____ are a means to make sure all precautions have been taken when a worker must perform in dangerous situations. a. permits b. records c. habits d. passports
Safe work ____ are a means to make sure all precautions have been taken when a worker must perform in dangerous situations. a. permits
300

 A _______ may be used during a quality audit to keep track of questions and answers and to ensure that the process is followed consistently

 a. SPC analyzer                                                    b. computer                                                      c. audit form                                                    d. checklist

A _______ may be used during a quality audit to keep track of questions and answers and to ensure that the process is followed consistently

d. checklist

300
Steam, hydraulic, spring tension, and compressed gasses are all examples of a. vibration energy b. kinetic energy c. dangerous energy d. pinch points
Steam, hydraulic, spring tension, and compressed gasses are all examples of c. dangerous energy
300
____________ Is the act of securing a load to prepare it for a lifting operation. a. rigging b. shoring c. trans-versing c. jibing
____________ Is the act of securing a load to prepare it for a lifting operation. a. rigging
300
The red diamond on the NFPA id label represents: a. reactivity level b. health hazard level c. flammability level d. the PPE required
The red diamond on the NFPA id label represents: c. flammability level
300
Licensure or certification is needed _______________ a. to perform lockout/tagout procedures b. to enter a confined space c. to participate in HazMat training d. to perform equipment maintenance
Licensure or certification is needed _______________ b. to enter a confined space
400

Quality audits should be performed on a ongoing basis to 

a. meet OSHA requirements                               b. ensure that corrective actions are effective       c. adhere ISO requirements                                d. make sure the quality assurance department is effective

Quality audits should be performed on a ongoing basis to                                                                b. ensure that corrective actions are effective  

400
Which agency says a worker should inspect and test all equipment, and assume it is still energized until proven? a. AC/DC b. OSHA c. EPA d. MLB
Which agency says a worker should inspect and test all equipment, and assume it is still energized until proven? b. OSHA
400
The forces created on a sling _____ as the angle of the sling's legs decrease. a. increase b. decrease c. stay the same d. cancel out
The forces created on a sling _____ as the angle of the sling's legs decrease. a. increase
400
The internationally recognized number assigned to a chemical for id purposes is called the ______. a. United Nations ID number b. International Standards Organization Number c. United Parcel Service Tracking Number d. Vendor Identification Number
The internationally recognized number assigned to a chemical for id purposes is called the ______. a. United Nations ID number
400
Which needs a certified worker and re-certification after welding? a. pressure rated devices b. oil tanks c. Frames with seams over 5 inches d. blinker fluid transfer
Which needs a certified worker and re-certification after welding? a. pressure rated devices
500

Organization that is primarily involved in helping companies to consistently produce high quality products.

ISO

500
Interrupting the power circuit at the motor disconnect is the only reliable way to _________.
lock out a motor
500
Do not leave a load _________ while to hoist is unattended
Suspended.
500
If safe handling information about a chemical cannot be found on its label you should check the _______.
MSDS (Material Safety Data Sheet)
500
Adapting the work area to fit the person to reduce stress is called __________________.
Ergonomics
M
e
n
u