Fuel
What is fuel Octane.
These are used to create electrical charge for small gas engines.
What is Valve Lash or Valve Adjustment.
The typical sizes of this common hand tool are #1,#2,#3.
What is a Phillips Screwdriver
These are on the outside of an engine or electrical component to allow for convection cooling of the engine.
What are Cooling Fins.
How is the common problem that occurs with fuel remedied.
What is Fuel Stablizer
These come in a variety of heat ranges.
What are Spark Plugs.
This follows the Compression Stroke in the four stroke cycle.
What is the Power Stoke.
This tool measures the amount of work accomplished by an engine.
What is a Dynometer.
This is mixed with the glycol to create the proper proportion of coolant.
This part of the fuel system is critical to atomizing the fuel so it can burn efficiently.
What is the Carburetor.
This is what connects the spark plug to the ignition coil.
What is the High Tension Lead
If the improper amount of oil is used in a Two-stroke engine this will cause compression loss.
What is cylinder scoring.
This tool is used when you want to apply a specific amount to force to threads on fasteners or checking the rolling resistance in an assembly.
What is a Torque Wrench.
This property allows the heat to be transferred through the coolant mixture.
What is Convection.
This principle is what allows the Carburetor to function properly.
What is the Venturi principle.
If gasoline looses its ability to resist igniting properly what could occur.
What is Pre-Ignition or Detonation.
If this is not properly hooked up or malfunctioning you will have a loss of pressure on the bottom side of the piston rings.
What is PCV or Positive Crankcase Pressure Valve.
This tool in conjunction with a hand drill will flatten out the ridges and create the cross-hatch pattern on the cylinder wall.
What does pressurizing the coolant mixture accomplish.
What is raising the boiling point.
This earth condition is critical to understand when discussing elevation and how it effects the ratio of fuel to air.
What is Atmospheric Pressure.
When engine speed increases what is also changed to compensate.
What is Ignition Timing.
This seals the Cylinder and Piston to insure proper compression along with allowing your engine to run cooler.
What is Engine Oil.
This tool is used when taking the first steps in diagnosing problems associated with an engines failure to start.
What is a Spark Testing Device or Spark Tester
This component is typically made with aluminum to allow for better cooling qualities when air flows through it.
What is a radiator.