CO2 Removing
Absorbing
Regenerating
Amine
Storage and Handling
Feed Handling and Storage
100

 Low Pressure Steam, Amine Inhibitor, Demin Water, Fresh Amine, Nitrogen, Antifoam

What are Secondary inputs of the CO2 removing Process?

100

89 Ft tall, 8 ft in diameter, 34 trays

What is the Amine Absorber Tower?

100

75ft tall and 7ft in diameter with 30 trays.

What is the Amine Regenerating Tower?

100
Stores Fresh Amine Unloaded from Trucks

What is the Fresh Amine Solvent Tank?

100

Motors used for the Hogs

Dual 400 hp motors.

200

Sweetened Syngas to Syngas Compressing Trains.

What is the Primary output of the CO2 Removing Process?

200

Vessel that separates Liquid droplets from the syngas stream.

What is the Feed Gas Knockout Drum?

200

Most Likely type of pump used as the Antifoam Injector Pump.

What is a Metering Pump?

200

Heats the Amine in the Fresh Amine Solvent tank.

What is the Fresh Amine Electric Heating Coil?

200

Size and Motor used for the Radial Stacker Belt.

275 Ft long.

40 hp motor.

300

The main input of the Amine Regenerating Sub process, Saturated with CO2.

What is Rich Amine.

300

The Tray # where lean amine is introduced into the Absorber Tower.

What is Tray #5?

300

Trick Question Double!!

What is the 31 ft long piece of equipment operated by a 30hp motor in the Feed Handling and Storage Process.

What is the Wood Feed Bin Discharge Screw Conveyor?

300

Size of the Fresh Amine Solvent Tank and the Lean Amine Tank

10,000 Gallons.

300

Size and Motor used for the Transfer belt

460 Ft Long.

30 hp motor.

400

Low Pressure Condensate, Amine sump drum to Vac Truck, Process condensate, Vents to Flare, Vents to ATM, Amine Sump to Drain, CO2 to Header

What are Secondary outputs of the CORemoving Process?

400

These Pumps pump lean amine solution through the lean/rich amine exchanger and through the lean amine cooler.

What are the Lean Amine Circulation pumps?

400
The Vessel where Condensed amine collects after it goes through the Amine Regenerator Overhead Condenser. 

What is the Amine Regenerator Reflux Drum?

400

Blankets the Fresh Amine solvent tank and the Lean Amine Tank.

What is Nitrogen?


400

Size and Motor used for the Reclaim belt.

418 Ft long.

20 hp motor.

500

The Three Sub-processes of CO2 Removing. 

What is Absorbing, Amine Regenerating, Amine Storage and Handling?

500

Injects Corrosion inhibitor into the circulating wash flow before it enters the absorber tower.

What is the Amine inhibitor Package?

500

Uses low pressure steam to heat rich amine and liberate CO2 as a vapor.

What is the Amine Regenerator Reboiler?

500

Transfers Lean Amine makeup to the Lean Amine Cooler Discharge line.

What Are the Lean Amine Supply Pumps.

500

Size and Motor used for the Surge Bins?

400 Cubic Feet Vessels.

7.5 hp motors.

M
e
n
u